Will the Equal-i-zer Weight Distribution System Work With a 3 Inch Hitch on a 2018 Ram 3500

Updated 04/11/2019 | Published 04/10/2019

Products Featured in This Question

Equal-i-zer Weight Distribution w/ 4-Point Sway Control - No Shank - 10,000 lbs GTW, 1,000 lbs TW

(932)

$775.00

B&W Hitch Receiver Reducer Sleeve - 3" to 2-1/2"

(422)

$39.92

Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 10,000 lbs GTW, 1,000 lbs TW

(932)

$850.00

Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 10" Rise/6" Drop

(288)

$238.39

Question:

Will this weight distribution system fit a truck with a 3”x3” hitch receiver?

asked by: Mitch

Expert Reply:

The best option I have for you to use an Equal-i-zer Weight Distribution System on your 2018 Ram 3500 with a 3" receiver tube opening is with a combination of the following parts.

Equal-i-zer Weight Distribution System (No Shank) - part # EQ37101ET
Equal-i-zer Weight Distribution Shank for 2-1/2" Hitches - part # EQ90-02-4900
B&W Hitch Receiver Reducer Sleeve - part # BWRHXA2183

This setup will then give you everything you need to use the Equal-i-zer Weight Distribution System. It is possible to use the Equal-i-zer Weight Distribution System part # EQ37100ET that you referenced but this means you will need two adapters, 3" to 2-1/2" and 2-1/2" to 2" which will work but the fewer adapters you use, the better off you will be.

expert reply by: Conner L