How Far do Trailer Springs Typically Compress
Published 03/22/2019
Question:
I have a tandem axle trailer that Im installing new axles on. 7000lb axles. It is a deck over trailer. I had the axles mounted under the springs on the old axles to gain clearance from for the tires to the deck. On part number e64SR. How much will these springs compress and how much clearance is needed from the top of the tire to the deck. 235/80/16. Thanks in advance
asked by: Tim C
Helpful Expert Reply:
Typical spring deflection for trailer leaf springs like the part # e64SR is right at 1-1/2 inches when at capacity. Generally speaking you will want to have 3 inches from the top of your tire to a fender on a trailer (in your case a deck) to accommodate for suspension travel.
Product Page this Question was Asked From
6-Leaf Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8" Long
- Trailer Leaf Springs
- Double Eye Springs
- 9/16 Inch Eye
- Nylon Bushings
- 7000 lbs
- 1-3/4 Inch Wide
- 6 Leaf
- 24-7/8 Inch Long
- Standard Grade
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: trailer fenders
- Search Results: dexter dx75
- Search Results: actuator
- Search Results: 23~478
- Search Results: 59190
- Search Results: fw16000101
- Search Results: f2 winch
- Shop: etrailer Electric Trailer Jack w/ Tongue Weight Scale - A-Frame - 18" Lift - 5,000 lbs
- Shop: Kenda Karrier KR35 ST175/80R13 LRC Radial Trailer Tire w/ 13" Aluminum AM03 Wheel - 5 on 4-1/2
- Shop: Lippert Square RV Entry Door - Right Hinge - 36" Wide x 72" Tall - Polar White
- Shop: SmartStraps Ratchet Tie-Down Straps w/ S-Hooks - 1" x 14' - 500 lbs - Qty 4
- Shop: Big Truck Big RV Tongue Weight Scale for Trailers with 6" SnapPad - 2,000 lbs
- Shop: Titan Chain E Track Ratchet Strap - 2" Wide x 12' Long - 1,000 lbs
- Shop: Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers - 2-1/2" Hitch - 6" Drop/Rise - 21K
- Q&A: Are Leaf Spring Measured When Loaded Or Unloaded?
- Q&A: Which Replacement Winch Strap Is Correct For the Fulton F2 2-Speed Winch FW32000101
- Q&A: How is Winch Strap of Fulton F2 Winch Accessed to Remove it.
- Q&A: Replacement Ratchet Spring and Install Diagram for Fulton F2 Winch
- Video: All About the Mounting Bracket for Trailer Fender
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Video: Detailed Breakdown of the U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles
- Q&A: Torque Specification for 12 Inch Wheel with 4 Lug Nuts on Boat Trailer
- Q&A: Typical Suspension Travel for Trailer Leaf Springs on Boat Trailer
- Q&A: Will MORryde X-Factor Crossmember Work With AllTrek 4000
- Article: Slipper Spring Trailer Suspension System Review
- Video: All You Need to Know About the Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs
- Article: How to Accurately Measure Trailer Leaf Springs
- Shop: Trailer Hitch
- Video: Comprehensive Review: Dexter E-Z Flex Suspension Kit
- Video: Review of TruRyde Trailer Leaf Springs - Double Eye Springs - TRU25FR
on Trailer Leaf Springs
