Power Connection for etrailer Electric Tongue Jack EJ-3527-BBX
Updated 03/12/2019 | Published 03/10/2019
Products Featured in This Question
Question:
Is this jack wired to be able to hook up to a battery as well
asked by: NEIL A
Expert Reply:
The etrailer electric tongue jack # EJ-3527-BBX has a pre-wired 7-way plug like part # H20046 that saves you the hassle of hard-wiring the jack to its power source.
It can receive its 12V operating power either from your tow vehicle's 7-way socket which uses 12V power from the vehicle battery, or it can be powered from a secondary 7-way socket you could install on your trailer, along with a trailer-mounted battery.
You could use 7-way part # HM48480, which includes a mounting bracket you could attach to the trailer, along with 10-gauge wire # 10-2-1 to make the 12V power connection to a trailer-mounted battery.
Product Page this Question was Asked From
Electric Jack w/ Footplate and 7-Way Plug - A-Frame - 25-1/8" Lift - 3.5K - Black
- Camper Jacks
- Pop Up Camper
- Teardrop Camper
- Travel Trailer
- A-Frame Jacks
- Steel
- 3001 - 4000 lbs
- Electric Jack
- 25-1/8 Inch Lift
- Bolt-On
- 1 Jack
- RAM
more information >
Continue Researching
- Shop: RV Mattress
- Video: Feature Review Fastway e2 Weight Distribution w/ 2-Point Sway Control
- Video: Draw-Tite Chrome Hitch Ball Installation
- Shop: Hopkins Endurance 7-Way Trailer Connector Socket - Vehicle End - Ergonomic Design
- Shop: Electric Jack w/ Footplate and 7-Way Plug - A-Frame - 25-1/8" Lift - 3.5K - Black
- Q&A: Recommended Weight Distribution and Brake Controller for a 2014 Airstream Sport 16
- Q&A: Best Shock Absorbing Shank and Weight Distribution Combination for a Trailer with GVWR of 6000 LBs
- Video: etrailer Electric Jack with Footplate Installation - 2011 Forest River Flagstaff Classic Super Lite
- Shop: Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 10,000 lbs GTW, 1,000 lbs TW
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: Electric Jack w/ Footplate - A-Frame - 25-1/8" Lift - 3.5K - Black
- Shop: 2" Hitch Ball for Equal-i-zer Weight Distribution Systems - 8,000 lbs
- Shop: 2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 12,000 lbs
- Article: Determining Trailer Tongue Weight
- Q&A: Do I Wire my Power jack to the Junction Box or Directly to the Battery
- Q&A: Adding An On-Board Trailer Battery to Trailer for Electric Power Tongue Jack
- Q&A: How To Wire EJ-3520-BBX Jack Directly To A Trailer Battery
- Q&A: Installing the Wiring on Lippert Power Stabilizer Jack
- Q&A: How to Add an Electric Trailer Jack to a Trailer
- Search Results: jack e up