Replacement Kwikee Step 28 Series Linkage and Motor

Question

Question:

Hi i have kwikee step 28 series on a Winnebago Elante 1993. i would like to replace the motor and the linkage. I believe it is a B type linkage. I could not load more picture.

asked by: SAMI

0

Expert Reply:

I reached out to my contact at Lippert and on the 28 series step you will have a B linkage. If you were just updating the linkage, then you would use the Lippert Components Kwikee Step Gear/Linkage with B # LC379161. If you were just updating the motor, then you would use the Lippert Components Kwikee Step Motor Replacement # LC379147. You can simply replace these components, but you may want to consider the Lippert Components Kwikee Steps Upgrade Kit for 28 Series # LC379769 which will update your step components to the newer IMGL (integrated motor/gearbox/linkage) style. This has been their standard since late 2004.

expert reply by: Jason S

0

click to enlarge

Answer 1

There are indeed many different replacement step controllers out there and I am happy to re-confirm that the correct current item to replace your Kwikee step controller 1800709 is part #LC363989. I verified this item with my parts contacts at…

view full answer...

Answer 2

We do have a direct replacement for your Kwikee Steps 1800709 controller - this is found as the Replacement Control Unit for Kwikee 38 Series Electric RV Steps #LC363989 on our site. Our part numbers may differ from the manufacturers but I've…

view full answer...

Answer 3

The only parts list for your triple step is attached. It unfortunately does not give the breakdown to the extent you are seeking with Teflon plate and wave washer as those parts are not replacement options from the manufacturer. I've attached the…

view full answer...

Answer 4

Hey John, for your Kwikee 28 Series Step with a B style linkage the correct replacement motor would be the part #LC379769. How old is your step setup? Older than 1999?

view full answer...

Answer 5

If you just need the gearbox, the linkage will have an A, B, or C. Once you know which one you have, then you will need one of the following: Lippert Components Kwikee Step Gear/Linkage with A #LC379160 Lippert Components Kwikee Step Gear/Linkage…

view full answer...

Answer 6

The Atwood #AT3308046006 cover that you selected will likely work just fine. I contacted the manufacturer and they did not have your model 600315.321 so I can't spec out the exact one. There may be another sticker on your unit ending in .331 or…

view full answer...

Answer 7

Hey Phil! Thanks for emailing me those photos. The correct replacement for your 369545 is the Replacement Motor for Kwikee Electric RV Steps #LC379147.

view full answer...

Answer 8

We've ran into this issue before, but unfortunately Kwikee/Lippert no longer manufactures that 151332 motor, and I'm sorry to say that they do not offer a replacement. I was unable to find anything about the 131320 part you mentioned either.…

view full answer...

Answer 9

Powered RV steps that still operate but that make bad mechanical noises may not need a new motor, but you're right that it is likely you'll need a new gearbox and/or linkage. There are two possible kits for your step unit. Part #LC379161 is…

view full answer...

Answer 10

The correct replacement motor for your LCI motor 366043 on your Kwikee steps is Lippert Components Kwikee Motor and Screws for New IMGL Step Item #LC379147.

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Replacement Kwikee Step 28 Series Linkage and Motor

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching