Recommended Flat Tow Wiring for 2019 Jeep Wrangler Unlimited Rubicon JL

Question:

I have a Roadmaster even brake system RM-9400. What do I need to make this system work to flat tow a 2019 Jeep wrangler unlimited rubicón JL.. Also what do I need for brake LED light system wiring. Is there a Battery charging wiring system from my RV to the Jeep battery.

1

Helpful Expert Reply:

For your 2019 Jeep Wrangler Unlimited JL Rubicon to use the Roadmaster Even Brake Portable Supplemental Braking System - Proportional # RM-9400 you will need the 12 Volt Outlet Kit- 20 amps # RM-9332 to get the power needed for the system. I do recommend using the Roadmaster Battery Charge Line Kit for Towed Vehicles # RM-156-25 to get the battery charging needed so you don't deplete your vehicle battery on long trips.

For your vehicle tow bar wiring to your LED lighting system I recommend the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267. This system will give you diodes to splice into your factory wiring to give you a very clean look utilizing your factory LED tail lights and still protecting your system electronics from feedback or overload.

If you have questions about any other products and compatibility let me know.

helpful expert reply by:
1
Jason S

Ask The Experts a Question >>

Question:

The roadmaster even brake RM-9400. Will I have to install a brake lite relay or a stop lite switch kit with this system and vehicle. If so what parts Will I need. Thank you.

asked by: Les S

1

Helpful Expert Reply:

Great question. I did some research and you will need the Roadmaster Stop Light Switch Kit # RM-751490 to communicate with your RV when the brakes of your Jeep are being applied. You however will NOT need the brake relay kit # RM-88400.

helpful expert reply by: Jason S
1
Jason S

Ask The Experts a Question >>


Products Referenced in This Question






Product Page this Question was Asked From


Similar Expert Q&A Pages

See More Q&A Expert Answers >>