Raising 2005 Copper Canyon Fifth Wheel That Already has Axle Under the Springs
Updated 10/03/2017 | Published 10/02/2017 >
Products Featured in This Question
Question:
Hello I have a question on my 05 copper canyon sprinter.I bought this trailer used a few weeks back.In order to get 6 inches between tailgate and rv the nose of the camper is way up in the air.my springs dont seem shot on trailer.But ive noticed the rear trailer tires are rubbing on floor of rv. i believe it was supposed to have 205/75r15 tires from factory and it has 225 on it .If i go back to 205/75 it will help the rubbing situation but make the rv even lower. also my axle is already under the springs.do they make blocks and longer ubolts like for the rear of a truck or a taller center equalizer.I am at a loss as to what to do.
asked by: Brett
Expert Reply:
There are some options for you to raise your 2005 Copper Canyon, the first of which is to replace your current hangers with taller ones, though they may not give you a great amount of lift. There is also the possibility of a lift kit, though only if your Copper Canyon has Dexter Torflex axles. For example, the Torflex Lift Kit # K71-725-02 is for side-mounted #12 Torflex axles with 5,500-7,000-lb capacities. I've added links to our pages with each of our hangers and lift kits for you to take a look at.
You could also replace your axles with the Timbren Axle-Less Suspension System. For example, # ASR2KHDS04 works with 3,500 lbs hub and drum assemblies and will give you 4" of lift. I've added a photo showing you the difference between a regular axle and the Timbren system so you can see firsthand how it works. I've also attached link to a video review of this product as well as a link to each of our Timbren systems.
Finally, you are going to need to replace your tires with smaller ones if they are rubbing. I recommend going with the ST205/75R/15 # TR20515D, which have a load range of D, with a max per-tire load of 2.150 lbs at 65 psi and a speed rating of M (81 mph). You can watch a video review of this tire by clicking on the attached link I've added for you.
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Heavy Duty - 4" Lift - 4 Bolt Flange - 2,000 lbs
- Trailer Axles
- Rubber Spring Suspension
- Standard Grade
- No Hubs
- 2000 lbs
- Spindles Only
- Universal Fit
- Lift - 4 Inch
- Timbren
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Search Results: grease~seal 10~19
- Search Results: 10~19 seal
- Search Results: timbren axle~less trailer suspension
- Q&A: What is the Difference Between Grease Seal 58846 and Grease Seal 10-19?
- Q&A: Dimensions for Timbren Heavy-Duty Axle-Less Trailer Suspension ASR2KHDS04
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Shop: Timbren Axle-Less Trailer Suspension - Heavy Duty - 4" Lift - 4 Bolt Flange - 2,000 lbs
- Shop: Karrier S-Trail Radial Trailer Tire with 12" Aluminum AM02 Wheel - 5 on 4-1/2 - Load Range E
- Q&A: Measurement of Hole Spacing on Torflex Lift Kit # K71-725-02
- Article: Trailer Tire Sizing
- Q&A: How to Determine Between 5 on 4-1/2 and 5 on 5 Bolt Patterns for Hub Covers
- Q&A: How Much Space Is Needed for Tires On Deck Over Trailer
- Q&A: Which Spindle Height of Timbren Axle-Less Trailer Suspension for Car Trailer
- Q&A: Recommendation to Upgrade Axle and Hubs on Northern Hardware Trailer
- Article: Is It Illegal to Leave My Hitch on My Truck?
- Article: Trailer Lighting Requirements
- Article: Double-Eye Trailer Suspension System Review
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: How to Tell the Weight Rating of a Trailer Axle




