Will the Fulton Brake Winch 143100 Fit the Universal Right Angle Mounting Bracket 24110

Question

Question:

I assume that this bracket works with the Fulton F143100 but wanted to confirm - thanks for your help

asked by: John

1

Helpful Expert Reply:

Yes, the Fulton High-Performance Brake Winch part # F143100 will work with the Universal Hand Winch Right Angle Mounting Bracket part # DL24110. I went out to our warehouse and test fit the two products together to confirm this for you.

I have attached a photo of the mounting bracket in use as well.

expert reply by: Conner L

1

click to enlarge

Answer 1

The Ultra-Fab Phoenix Electric Trailer Jack with Remote- 5,500 lbs #UF38-944055 or 4,000 lb #UF38-944040 without remote sounds like it may have a mechanical issue. I recommend using the manual crank to extend or lower the jack. If you can use this,…

view full answer...

Answer 2

When installing guide-ons on your boat trailer, like part #CE27636, you want to make sure that they extend high enough that they are easily visible when you are loading your boat. If you feel comfortable loading your boat with the guide-ons being…

view full answer...

Answer 3

Hey Darryn, the etrailer winch part #e75VV that you referenced has a capacity of 1,500 lb which isn't quite high enough unless you have roller bunks. For wood bunks with a normal winching distance the ratio of winch capacity to boat weight is 2…

view full answer...

Answer 4

You will want to replace your MaxxTow MaxxHaul Hand Winch #MT50156 as there are no spare parts available for it. I created an image with the dimensions for the base with the mounting holes. The base is 5-1/2" long and 3-1/2" wide. There are…

view full answer...

Answer 5

Yes you are correct in that the factory rubber contact pad is not bolted to the bump stop mount but rather pressed in. To remove this part you will need to soak the rubber pad in a lubricant. Once soaked you can then use a prybar to try and wedge the…

view full answer...

Answer 6

The mounting adapter, #DL24055, was designed for Dutton-Lainson StrongArm winches so I cannot say if it will fit your Powerwinch model 912 or not. I can tell you the mounting hole pattern and you can compare that with your winch. I made a picture…

view full answer...

Answer 7

You can use Dutton-Lainson Worm Gear Hand Winch with Hex Drive Handle - 2,000 lbs Item #DL11004 for your utility trailer. If you do I strongly recommend using a drill to reel in the line or let it out (worm gear winches do not have a free-spool mode)…

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

Trailer wheel bearings are specific to the spindle that is installed on the axle that is on your trailer. You will need to safely support the trailer, remove the wheel and tire, remove the grease cap, remove the cotter pin and washer that secures the…

view full answer...

Answer 10

Hello Rob, thanks for reaching out. The Reese 5th Wheel Trailer Hitch #RP30051 installs to industry standard 5th wheel rails. We do offer a kit for your 2022 Silverado 2500, and for that I recommend the following: - B&W Custom Installation Kit w/…

view full answer...

Answer 11

I have a solution to help with the chucking that you are experiencing as there is not a Reese Goosebox that fits the same bolt pattern used by the Leland 7920 Pinbox. The bolt hole spacing on your pin box is different vertically and horizontal from…

view full answer...

Answer 12

Hey Daniel congrats on the new truck! The Lomax Stance Hard Tonneau Cover item #LOM54RV does indeed fit the 2026 Chevrolet Silverado EV with the Mid Gate. It also works with the Multi-Flex Tailgate that comes on the Trail Boss models. For a…

view full answer...

Will the Fulton Brake Winch 143100 Fit the Universal Right Angle Mounting Bracket 24110

Product Page this Question was Asked From

Continue Researching