Universal Hand Winch Right Angle Mounting Bracket for Hand Winches by Dutton-Lainson

Universal Hand Winch Right Angle Mounting Bracket for Hand Winches by Dutton-Lainson

Item # DL24110

lowest price pledge

Retail:$30.44

Our Price: $13.95

You Save: 54%
Accessories and Parts

Orders above $99 qualify for Free Shipping

Shipping Weight: 4 lbs

Quantity: 
In Stock, Ships Today
Universal Hand Winch Right Angle Mounting Bracket for Hand Winches by Dutton-Lainson Hand Winch DL24110
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

Videos


  • Trailer Winch
  • Hand Winch
  • Hardware
  • Dutton-Lainson
  • Mounting Bracket
Call 800-298-8924 to order Dutton-Lainson accessories and parts part number DL24110 or order online at etrailer.com. Free expert support on all Dutton-Lainson products. Guaranteed Lowest Price and Fastest Shipping for Universal Hand Winch Right Angle Mounting Bracket for Hand Winches by Dutton-Lainson. Accessories and Parts reviews from real customers.


  • All Info
  • Reviews (6)
  • Q & A (12)
  • Videos (1)
  • Photos
  • Why etrailer?

Dutton-Lainson Accessories and Parts - DL24110


Universal Right Angle Mounting Bracket for Hand Winches

Universal right-angle mounting bracket fits most hand winches up to a 2,000 lb capacity. Heavy 1/4" steel with powder coated bronze finish. Made in the USA.

24110 Universal Right Angle Mounting Bracket by Dutton-Lainson Model 6565





Video of Universal Hand Winch Right Angle Mounting Bracket for Hand Winches by Dutton-Lainson


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Dutton-Lainson Trailer Winch DL24110 Review

Today we're going to be taking a look at the Universal Hand Winch Right Angle Mounting Bracket, for hand winches by Dutton Lainson. The Universal Right Angle Mounting Bracket is going to fit most hand winches up to a two thousand pound capacity. Got the nice big warning label right here, that's going to give us the capacities listed right on the steel construction. This is a heavy duty quarter inch, one piece steel, and it's going to feature a nice powder coated bronze finish to resist rusting, corrosion, and to last a long time. Product's made in the U.S.A. We're going to take a minute just to go over the measurements. It's going to give us an over all width of 5 7/16 of an inch. Now both sides are going to measure from the center of the curve to the edge here.

They're going to be identical, so if we take that measurement, we're going to be looking right at 5 inches. You can see here that we have the same hole pattern on each side. The diameter and the measurements of the holes are going to be identical, so I'm just going to do it on one side here. If you take a measurement of the diameter of the smaller hole, it's going to give us an opening size of about 3/8 of an inch. The elongated holes, measuring the length first, it's going to measure 3/4 of an inch by 3/8 of an inch. The smaller holes, measuring across, are going to be separated on center, by 3 1/4 of an inch.

The elongated holes, center on center, will be right on 3 inches. Going this direction, the smaller holes are going to be separated on center, by 2 1/8 of an inch, front to back. You can also here that the elongated holes, here at the edge, are going be, the opening, so the edge of the elongated hole is going to be in line with the center of the small holes. And again that's going to be identical on either side of the mounting bracket. That's going to do it for today's review of the Universal Hand Winch Right Angle Mounting Bracket, for hand winches by Dutton Lainson.


Customer Reviews

Universal Hand Winch Right Angle Mounting Bracket for Hand Winches by Dutton-Lainson - DL24110

Average Customer Rating:  5.0 out of 5 stars   (6 Customer Reviews)


- DL24110
by:

the bracket was exactly as advertised. very heavy duty and well made. i plan to mount this on my saw mill and hook up a winch for loading logs. the system the saw mill people sells for $450. and i can do the same with this bracket for a lot less. 613868



- DL24110
by:

Very solid sturdy bracket! 1/4 inch thick solid steel with conveniently pre-drilled holes. I'm actually using it for a small electric winch on my tractor, so I had to drill a few other holes, and this bracket is very tough steel. This is probably not for use with industrial applications, but it definitely is tough enough for around the house. etrailer seems to always have quality parts when I can't find what I'm looking for elsewhere. 612282



- DL24110
by:

I ordered this product to mount a boat winch for a kayak lift in my garage. Very heavy and well built. Just what I needed. 334366



- DL24110
by:

A+ 178436



- DL24110
by:

Little big but it worked fine 118485



- DL24110
by:

Product as described. Fast shipping. Th anks! 63509


6
6

Ask the Experts about this Dutton-Lainson Accessories and Parts
Do you have a question about this Accessories and Part?


  • Recommended Hand Winch for 16 Foot Open Car Hauler Trailer
  • For your 16 foot open car hauler, I recommend the Fulton 2-Speed Trailer Winch with Heavy Duty 20' Strap # F142424. This is rated for 3,200 lbs and is zinc plated to resist corrosion. It has 2 speeds for quick pull or increased mechanical advantage. It has a free-wheel position and a shift lock to keep the shaft in gear. For a winch stand, we have # CE31013G and bracket # DL24110. Your other option is to consider using an electric utility winch like # BDW15019 and then use wiring...
    view full answer...

  • Will the Fulton Brake Winch 143100 Fit the Universal Right Angle Mounting Bracket 24110
  • Yes, the Fulton High-Performance Brake Winch part # F143100 will work with the Universal Hand Winch Right Angle Mounting Bracket part # DL24110. I went out to our warehouse and test fit the two products together to confirm this for you. I have attached a photo of the mounting bracket in use as well.
    view full answer...

  • Adapting Universal Hand Winch Right Angle Mounting Bracket
  • You might be able to adapt the mounting method on your trailer using mounting plate # DL24110. Check out the attached photo of the Universal Hand Winch Right Angle Mounting Bracket, part # DL24110. With the measurement between the mounting holes it may be difficult to be able to attach the mounting bracket without either welding it in place or by drilling through the trailer frame to accommodate the hole dimensions. At present we only offer one mounting bracket for winches, # DL24110.
    view full answer...

  • Angled Winch Mounting Bracket Recommendation for a Boat Trailer
  • Sounds like you are looking for a winch angle mounting bracket like the part # DL24110. This is a right-angle mounting bracket that you see used on boat trailers like you mentioned.
    view full answer...

  • Winch and Mount Recommendation for Winching a Small Travel Trailer Into Storage
  • For winching a trailer any length of distance a worm gear winch wouldn't be your best option. Worm gear winches require a great deal of cranking to go a small distance. For example the # DL11011 requires 30 cranks of the handle for the reel to turn once. A better winch would be the # DL14730 that will allow you to pull your trailer in quicker and has a brake for a controlled release of the line. Check out the review video I attached for more info. The # 1559B is for electric winches,...
    view full answer...

  • Distance Between Mounting Holes of the Universal Hand Winch Right Angle Mounting Bracket, # DL24110
  • I have attached a photo of the Universal Hand Winch Right Angle Mounting Bracket, part # DL24110. The center to center hole measurements for the smaller holes are 3-1/4 inches side to side, or 2-1/8 inches front to back. The bracket itself measures 5-7/16 inches wide, and both sides are 5 inches long from the center of the bend. The largest diameter bolt you could use would be a 3/8-inch or M10 diameter bolt. The outside openings of the oval holes are in line with the centers of the...
    view full answer...

  • Dimensions Of Universal Hand Winch Right Angle Mounting Bracket
  • I have attached a photo of the Universal Hand Winch Right Angle Mounting Bracket, part # DL24110. The center to center hole measurements for the smaller holes are 3-1/4 inches side to side, or 2-1/8 inches front to back. The bracket itself measures 5-7/16 inches wide, and both sides are 5 inches long from the center of the bend. The largest diameter bolt you could use would be a 3/8-inch or M10 diameter bolt. The outside openings of the oval holes are in line with the centers of the...
    view full answer...

  • What Size Bolts Can Be Used On Dutton-Lainson Universal Hand Winch Mounting Bracket # DL24110
  • I went out in the warehouse and measured the diameter of the holes in the # DL24110 mounting bracket and the round holes measured 3/8-inch in diameter and the oblong holes measured 3/8-inch by 3/4-inch. So, the largest diameter bolt you could use would be a 3/8-inch or M10 diameter bolt. The owners manual of a Dutton-Lainson winch will say for maximum strength and safety a winch should be mounted with at least three, 3/8-inch or M10 bolts, washers, and lock washers.
    view full answer...

  • Mounting a Winch on a Snowmobile Trailer Tongue or Ball Mount
  • The CE Smith winch stand # CE31013G is not designed to attach to a ball mount and a ball mount is not designed to have anything attached to it for safety so the stand would have to be installed on the trailer though it is not wide enough for a 3 inch tongue. If you plan on using a hand winch then you could use the universal right angle mounting bracket # DL24110 though if the trailer has a straight pole tongue it may require some fabrication to get it installed in the right place. Another...
    view full answer...

  • Recommended Winch Stand And Mount For 1998 Nitro Boat Trailer
  • For your 1998 Nitro Trailer, I recommend the CE Smith Winch Stand - Galvanized Steel - 30" Tall x 2" Wide # CE31013G. You can then use the Universal Hand Winch Right Angle Mounting Bracket for Hand Winches by Dutton-Lainson # DL24110 if you want a different mounting for the winch.
    view full answer...

  • Recommendation for a Winch to Load a Harley Davidson Motorcycle into a Cargo Trailer
  • You would need to consult a qualified welder to have a mount fabricated that will allow you rotate the handle 360 degrees on a hand winch. We do not stock any bolt on parts that are heavy enough to be used to mount a winch safely in this case, and you would need to tie the mount into the trailer frame for stability. We have a Universal Hand Winch Right Angle Mounting Bracket, item # DL24110, which would make the fabrication of the raised mount easier. An option I would look at, would...
    view full answer...

  • Mounting Hole Dimensions for Universal Hand Winch Right Angle Bracket DL24110
  • I got a schematic for the # DL24410 right angle bracket from my contact at Dutton-Lainson, and the center to center hole measurements for the smaller holes are 3-1/4 inches side to side, or 2-1/8 inches front to back. The outside openings of the oval holes are in line with the centers of the smaller holes. The bracket itself measures 5-7/16 inches wide, and both sides are 5 inches long from the center of the bend.
    view full answer...


Do you have a question about this Accessories and Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Sarah L
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Installed by:
Cole B
Expert Research:
Jeffrey L

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.