Availability of Spacers for Timbren Springs on Lifted 2019 Ford F-250

Published 11/15/2018

Products Featured in This Question

Timbren Suspension Enhancement System - Severe Service - Rear Axle

(924)

$398.07

Timbren 1" Spacer For Raised Frame Vehicles - 3/8" Bushing

(144)

$16.57

Timbren 1/2" Spacer for Raised Frame Vehicles

(66)

$11.37

Question:

Hello I am waning to install the Timbren springs on my 2019 Ford F-250 that has a lift but not sure if I will need spacers and if so how many I would need? Thanks.

asked by: Don

Expert Reply:

The Timbren Suspension Enhancement System # TFRTT350J referenced in your question is confirmed to fit your 2019 Ford F-250 and will do a great job of adding support to the rear axle.

If you have a true suspension lift on your F-250 where the axle was actually moved further from the frame then you will likely need to add a spacer. These are available in 1 inch # A25723-90AH00 and 1/2 inch # TA25722-90P00 sizes. You basically just need to use the amount of spacers that it takes so that you have a 1/2 inch or 1 inch of clearance between the bottom of the Timbren spring and the top of the contact point/axle. Just keep in mind that you can use a maximum of 4 spacers per side and you will need to source a longer bolt locally so that the springs can be mounted properly.

I have attached a short video demonstration on the Timbren system along with the written installation instructions that you can also check out.

expert reply by: Chris R