Spare Tire Carrier for 6-Bolt Trailer Wheels  

A lot depends on the wheel bolt pattern of your spare tire and the frame size of the trailer. I have included a link to an FAQ article on measuring for bolt pattern for you. If you have a frame that is up to 3 inches wide by 4 inches high, AND you…

Thanks for the photo, and the distance between the front and rear bolt holes is 5 inches for the Demco Channel Tongue Trailer Coupler - Silver - 2-5/16" Ball - 3" Channel - Bolt On - 21K #DM16080-52. So if you measure the bolt holes…

The channel of the Demco 21K #DM16080-52 coupler is 3 inches deep. The distance from the center of where the trailer ball would sit to the first 5/8 inch hole is 7 inches, and 12 inches to the second hole. The Titan #T4853100 dimensions are a…

All of that is not necessary. All you have to do is lock out the surge coupler so it cannot move in and out or disconnect the brake lines. By removing the old coupler you would have to remove the brake lines any way. A surge coupler can still be…

Hello Dustin, thanks for reaching out. We actually carry conversion kits that are made specifically for this purpose. For your boat trailer with 6K Dexter axles, you can use the Hydrastar Electric Over Hydraulic Actuator Kit for Disc Brakes…

Hello Ray, thanks for reaching out. The #GS-2250DL are for grease only, and they are not intended to be used in an oil bath system. A better option for that is the Timken Grease Seal part #TMK98ZR. This is identical in size to the #GS-2250DL seal,…

Tire designations ST205/75D14 and ST205/75R14 are both for special trailer tires with a 205mm width, 75-percent aspect ratio and that fit a 14-inch wheel. The difference between them is the tire's type of construction. The ST205/75D14 tire is a…

I do have some options for you but most of our marine spare tire carriers are zinc plated, not galvanized or stainless. That said, there should not really be any issues with this and the aluminum. I recommend the Fulton Hi-Mount Spare Tire Carrier…

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

When it comes to a 205/75R14 trailer tire like the Kenda, #AM10234, this size of tire will fit a 5", 5-1/2", 6", or 6-1/2" rim. I spoke with our in-house tire expert and he said that when it comes to choosing a rim for a trailer…

Hi Brian; the #WST49FR you looked at is what you need. This is the #LH34FR wheel with the #LHWL300 tire mounted on it.