How to Wire the Jensen Marine Amplified Subwoofer Part # JMPSW800

Published 10/12/2018

Question:

What is the wiring diagram for the subwoofer to power up and working? You got 12v , remote , ground.

asked by: Marshall

Expert Reply:

I assume you are referring to the Jensen Marine Amplified Subwoofer part # JMPSW800. If that is the case then I have attached the correct wiring diagram for you. There are a set of red/white RCA cables that will go to a stereo like the Furrion Stereo part # DV3100 and then a set of three wires; one for power, ground, and remote. The power wire will need to be attached to the vehicle's 12 volt battery with a 10 amp fuse placed within 18" of the positive terminal. The ground wire can be ran to any bare metal surface on the frame but it needs to be the same gauge as the power wire which will vary depending on the distance from the subwoofer to the battery. The remote wire needs to be attached to a keyed source or one that only activates while the vehicle is running.

The entire installation manual has also been attached for you as well.

expert reply by: Conner L