Could Roadmaster Sway Bar # RM-1109-175 Fit 2015 Roadtrek 190 with Generator

Question

Question:

Will I fit on a 2015 popular190 with a genorater below.........

asked by: Harry J

0

Expert Reply:

As long as the generator allowed the stock sway bar of your 2015 Roadtrek 190 the Roadmaster Sway Bar part # RM-1109-175 would also fit. I looked up pictures and it looks like there shouldn't be a problem as I was able to see the generator and the sway bar both fit at the same time.

expert reply by: Jameson C

0

Answer 1

For your 2010 RoadTrek 190, I recommend the Roadmaster Rear Anti-Sway Bar for Trucks and Motor Homes #RM-1109-175 which is a confirmed fit for your vehicle and should not interfere with your generator. I've attached an installation video to…

view full answer...

Answer 2

Since the Roadmaster Rear Anti-Sway Bar Item #RM-1109-173 is meant for as a stock sway bar replacement we don't carry the brackets but we do have a confirmed fitting sway bar with the brackets together - Roadmaster Rear Anti-Sway Bar Item…

view full answer...

Answer 3

There are several items to reduce sway, see link, that will fit your 2002 Chevy Cutaway 3500. If the existing bar has a 1-1/2 inch diameter then you can use #RM-1109-175 that you have referenced. If the chassis was built before June 2007, you will…

view full answer...

Answer 4

The fit of a Sway Bar like Roadmaster RM-1109-175 depends on the specific version of your base Chevy Express Van. For instance, if you have the 2500/3500 Class C Cutaway you can use part #RM-1109-175. This also fits other versions such as the…

view full answer...

Answer 5

I checked with Roadmaster and did verify that the Roadmaster Rear Anti-Sway Bar #RM-1109-175-00 is confirmed to fit your 2007 Chevy Express Class C chassis. The axle mounting kit (which is included with this part number) is indeed to allow for an…

view full answer...

Answer 6

Yes, for your 2014 Forest River Sunseeker built on a 4500 Class C Chevy Chassis you would want the rear sway bar part #RM-1109-175. This is a 1-1/2 inch thick sway bar confirmed to fit your vehicle. The part #RM-1109-150 will also fit your RV but…

view full answer...

Answer 7

Hi Joe; the best upgrade you can make is to add anti-sway bars like the #RM-1109-175 you looked at. This is a confirmed fit for your 2014 Class C motorhome. The rear is the most important addition but the best option is to also add a front anti-sway…

view full answer...

Answer 8

The Roadmaster Anti-Sway Bar #RM-1109-175 is a fit for a 2012 GMC Savana or Chevy Express 2500 and 3500 Cut Away Vans of the following body configurations: Class C, EV Type 1, EV Type 3, and the Passenger Cut Away; 4500 Class C and EV Type 1. For…

view full answer...

Answer 9

The correct rear sway bar for your 2006 Roadtrek 190 Chevy 3500 is the Roadmaster part #RM-1109-175 for the rear that you referenced and then for the front #RM-1109-149 and you'd be set.

view full answer...

Answer 10

I spoke with my engineering contact at Roadmaster, who tells me that the #RM-1109-175 anti-sway bar is the correct choice for your Micro Bird Bus on a 2005 Chevy Express cutaway chassis. Because the vehicle was built before 2007, the #RM-590061-00…

view full answer...

Answer 11

It is most likely a Class C. For a rear anti-sway bar you would use #RM-1109-150. Since it is a 2001 Chevy 3500 chassis you will need an additional axle mounting bracket, #RM-590061-00, to complete the installation. I have included a link to the sway…

view full answer...

Answer 12

For the front and rear anti-sway bars that fit your 2008 Chevy Express 3500 Cutaway Chassis you will need the following: Front - #RM-1109-149 Rear - #RM-1109-175

view full answer...

Could Roadmaster Sway Bar # RM-1109-175 Fit 2015 Roadtrek 190 with Generator

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching