Add-A-Step for TorkLift GlowSteps # TLA8102

Question

Question:

will this kit fit model 8102 steps

asked by: Larry L

1

Helpful Expert Reply:

The Add-A-Step you will need for your TorkLift GlowSteps, # TLA8102, is actually # TLA8101. I have included a link to a video about it for you.

expert reply by: Michael H

1

Answer 1

If your step is 25-7/16 inches wide you could use the add-a-step part #TLA8101 as a replacement solution, or if you had a step that was 27-7/16 inches you could use the part #TLA8001.

view full answer...

Answer 2

If your TorkLift GlowStep Revolution Scissor Steps have a 27-1/2' wide mounting bracket then the correct Add-A-Step for TorkLift GlowStep Revolution Scissor Steps is part #TLA8001 which is 22" wide. If your TorkLift GlowStep Revolution…

view full answer...

Answer 3

You want to measure from the ground to the bottom of the door opening. If it's between 32-1/2 inches and 40 inches the TorkLift GlowStep Revolution Scissor Steps #TLA8104 would be a correct fit. The mounting base dimensions are 25-7/16 inches…

view full answer...

Answer 4

You can indeed add a 5th step later down the line to the TorkLift GlowStep Revolution Scissor Step Assembly #TLA8104 that you referenced. To do this, you will just need the TorkLift Add-A-Step #TLA8101. This will give you a 5th step with the same…

view full answer...

Answer 5

Hey Nick, yes the Single Add-On Step for TorkLift GlowStep Kits #TLA7801 is the correct add on for the TorkLift GlowStep Camper Scissor Steps #TLA7806.

view full answer...

Answer 6

I have a solution for you but we don't have a replacement bracket to replace the support and bolt that was broken on your TorkLift GlowStep similar to the #TLA8004 . Instead you would need to use the Add-A-Step for TorkLift GlowStep Revolution…

view full answer...

Answer 7

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

Hey Donny! For your Dometic Penguin/Brisk Air 15,000 BTU AC model B59516.711C0-MX, the correct soft start is the #DMC93JF. This is designed for Dometic Brisk II electronic air conditioner units with in-wall thermostats.

view full answer...

Answer 11

That’s a great question Chadwick, and this is one of those situations where the change in technology really matters. The GE Appliances Low-Profile RV AC w/ Heat Pump part #GE26RR will replace your current ARC13AACBL2 setup, but it’s important to know…

view full answer...

Answer 12

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Add-A-Step for TorkLift GlowSteps # TLA8102

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching