Replacement Braking Assembles for an AL-KO 7,200 lb Axle
Updated 07/17/2018 | Published 07/16/2018
Products Featured in This Question
Question:
Hello, I am looking at getting replacement brakes for my trailer. On the hub of the trailer is stamped AL-KO 7200 E17. I measure drums as 12 inch by 2-1/4 with 5 bolt flange. looking for replacement parts.
asked by: Larry
Expert Reply:
The correct replacement braking assemblies for your trailer with an AL-KO 7,200 lb axle is the Electric Trailer Brake Kit part # AKEBRK-7-SA for self adjust or part # AKEBRK-6 for manual adjust. The self adjust brakes as the name states will automatically adjust for even pad wear after the initial setup wheres the manual adjust will require continual adjustments for even pad wear. You will also need mounting hardware to install either set and for that I recommend part # BRKH12.
I have attached a review video of each set for you in addition to a sample install video.
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 12 x 2 Inch Drum
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: bearings trailer bearings races seals caps
- Shop: Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Search Results: trailer hubs and drums
- Search Results: trailer brakes
- Search Results: trailer bearings races seals caps accessories and parts
- Search Results: 6~1/2 inch hubs wheel covers hubcaps
- Search Results: 6 on 5~1/2 inch trailer hubs and drums
- Search Results: 6 lugs wheel covers hubcaps
- Shop: Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 6,000-lb Axles - 6 on 5-1/2 - Pre-Greased
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 6 on 5-1/2 - Pre-Greased
- Shop: Dexter Bearing Kit, 15123/ 25580 Bearings, 10-36 Seal
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Q&A: Replacement Hub/Drum for AL KO 7,200 lb Trailer Axle
- Shop: Terran Industries Trailer Idler Hub Assembly for 5,200 to 6,000 lbs Axle - 6 on 5-1/2
- Q&A: How to Find Replacement Electric Drum Brakes for a Trailer
- Video: The Low-Down on the Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles
- Video: Timken Bearing Kit Installation - Enclosed Trailer
- Video: Checking Out the Trailer Hub and Drum Assembly
- Video: The Low-Down on the Timken Bearing Kit, 15123/25580 Bearings, 15245/25520 Races, 413470 Seal
- Q&A: What are the Dimensions of a #99 Spindle
- Video: A Closer Look at the 7-Piece Installation Set for Bearings, Races, and Seals
- Video: Dexter Nev-R-Adjust Electric Trailer Brakes Review
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Q&A: Capacity of Trailer Hub Stamped Al KO 7,200
- Q&A: Trailer Hub Seal with Inner Diameter 1.375 and Outer Diameter 1.98 inches
- Q&A: How To Find Correct Replacement 6-Lug Hubs for Boat Trailer
- Q&A: Availability of Replacement Trailer Hub Bearing 25580
- Shop: Suspension Enhancement