Wheel Stud Replacement Recommendation for Trailer Hub # AKHD-655-6-K
Updated 07/12/2018 | Published 07/11/2018
Products Featured in This Question
Question:
Can you tell me if you guys stock the wheel studs that are used on the AKHD-655-6-K? I need some of them but I dont know which ones in your store they are. Thanks!
asked by: Paul K
0
Expert Reply:
The wheel studs that the trailer hub part # AKHD-655-6-K uses are 1/2 inch in diameter by 1-1/4 inch in length. For that we have the # K12WB169 which will work well.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- Pre-Greased
- Standard
- 25580 / 15123
- Standard Grade
- For 5200 lbs Axles
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: Replacement Brake Assemblies for 4.4k Axle with Assemblies Marked 5.2k
- Q&A: Replacement Electric Trailer Brake Assembly for Axletek Hub BD-655
- Article: Most Popular Wheel Bearings
- Q&A: Trailer Hub Replacement for Axletek BD-65535
- Q&A: Replacement Bearings for Dexter 5,200 lb Axles
- Q&A: Looking For Replacement For Hub Seal Victor 47445
- Q&A: Replacement Hubs and Brakes for Axle Tecknology BD2-655 Drums
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Can I Run Velit 12V Air Conditioner In My Camper Van While Driving?
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Wiring Diagrams
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Parts Required to Add Electric Over Hydraulic Drum Brakes to a Trailer
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide