Determining Correct Replacement Bearings for Eclipse Toy Hauler

Updated 06/29/2018 | Published 06/27/2018

Products Featured in This Question

Grease Seals 10-36 (pair)

(2565)

$10.09

4" Carbon Fiber Digital Caliper

(26)

$12.23

Question:

FOR 2017 ECLIPSE ATTITUDE TOY HAULER TANDEM AXLES, INCLUDING COTTER PINS

asked by: RONALD C

Expert Reply:

We do likely have the bearings and seals needed for the hubs on your 2017 Eclipse Attitude Toy Hauler, however I was not able to locate the exact sizes you need. Trailer manufacturer's don't usually keep an accurate record of these types of parts that are installed at the factory, so in order to determine the correct replacement bearings you will just need to pull one of the hubs.

After you pull the hub, you will want to check for the bearing numbers that should be stamped right inside the bearings themselves. If you cannot read the numbers, you can also take a few measurements along the spindle where the bearings and seal sit with a digital caliper like # PTW80157. I have attached an image that shows you exactly where those measurements will be taken.

If you are able to tell me this information, I will be happy to recommend the needed bearings and seal for your trailer. Otherwise, I have attached a link that will take you to our available selection of bearings and seals that you can look through. You can filter through the different sizes by using the facets on the left side of the page.

expert reply by: Chris R