Measurements of Base on 1/2" Hub Wheel Stud # 7-150
Published 06/18/2018
Question:
Quick question: Your part description top of the web page says that this stud is 2 3/32 inches long 2.094 inches, which I assume to mean the Under Head Length or UHL. However, the drawing / of the product a bit lower on the page shows the stud length indicated as measurement B is 2.24 inches. Would you please clarify which measurement is correct, and update the incorrect measurement. Thanks for the help.
asked by: Paul S
Helpful Expert Reply:
I took a trip out to the warehouse with a digital caliper to take the measurements you were looking for regarding Trailer Hub Wheel Stud, Drive-In, 1/2" x 2-3/32" # 7-150. I found that the base measured 0.16 inches thick and the diameter was 0.75 inches. I also made a photo for you which shows these measurements that should be helpful.
Product Page this Question was Asked From
Trailer Hub Wheel Stud, Drive-In, 1/2" x 2.24" - Qty 1
- Accessories and Parts
- Boat Trailer Wheels
- Trailer Hubs and Drums
- Trailer Tires and Wheels
- Wheel Studs
- 1/2 Inch Diameter
- Drive-In Stud
- 2-1/4 Inch Long
- Redline
more information >
Continue Researching
- Shop: Replacement DeeMaxx Disc Brake Caliper - Maxx Coating - 7,000 lbs to 8,000 lbs
- Shop: Replacement DeeMaxx Disc Brake Caliper - Maxx Coating - 3,500 lbs to 6,000 lbs
- Shop: Replacement DeeMaxx Disc Brake Caliper - Stainless Steel - 7,000 lbs to 8,000 lbs
- Shop: DeeMaxx Disc Brake Kit - 13" Rotor - 8 on 6-1/2 - Maxx Coating - 1/2" Bolts - 7K
- Shop: Grease Seal - Double Lip - 2.250" ID - 3.376" OD - GS-2250DL
- Shop: Trailer Hub Wheel Stud, Drive-In, 1/2" x 2.24" - Qty 1
- Shop: Replacement DeeMaxx Disc Brake Caliper - Stainless Steel - 3,500 lbs to 6,000 lbs
- Q&A: Wheel Stud that is Longer Than K12WB2 with Same Diameter
- Q&A: Trailer Hub Wheel Stud to Replace 1/2"-20 x 2-1/4 Dexter Wheel Studs
- Q&A: Replacement Reliable CL-1000 Calipers for Hydroglide Trailer
- Q&A: Replacement Trailer Wheel Studs With 1/2 inch Diameter
- Q&A: Difference Between Mini Mod Trailer Rim and Non-Mini Mod Trailer Wheel
- Q&A: Replacement Rotors and Calipers Needed for a 2003 Mastercraft Single Axle Boat Trailer
- Q&A: Replacement Brake Kit for a 1995 Mastercraft Single Axle Boat Trailer with 3,500 Lb Axle
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Stability Control for Heavy Duty Vehicles
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Trailer Lighting Requirements
- Article: Determining Trailer Tongue Weight
- Article: How to Raise Your Travel Trailer Height
- Article: Most Popular Wheel Bearings
Paul
6/18/2018
Quick question: Your part description top of the web page says that this stud is 2 3/32 inches long 2.094 inches, which I assume to mean the Under Head Length or UHL. However, the drawing / of the product a bit lower on the page shows the stud length indicated as measurement B is 2.24 inches. Would you please clarify which measurement is correct, and update the incorrect measurement. Thanks for the help.