Where to Find Brake Controller Fuse and Relay for 2008 Chevy Silverado

Question

Question:

No corrosion need to know where fuse for trailer brakes are located in 2008 siverado 1 ton

asked by: Alieta

0

Expert Reply:

Sometimes the fuses are already installed from the factory on a 2008 Chevy Silverado when installing a brake controller, but if not the fuse slots are in the front of the box. I have attached a picture that shows the location of fuse slots.

I have also linked a video installation of a brake controller on a 2008 GMC Sierra and an FAQ on brake controller installation on a 2008 Sierra/Silverado.

expert reply by: Jameson C

0

click to enlarge

Answer 1

Fortunately, GM eliminated the need for the Wiring Adapter with the 2007 model year new body style trucks. The brake controller would attach directly to the existing tow package wires located under the dash. The tow package harness is located to the…

view full answer...

Answer 2

When making the under hood connections to install a brake controller on a 2008 Chevy Silverado, you just have to make sure you have everything in the proper location. We actually have an FAQ article which I have linked for you that covers the under…

view full answer...

Answer 3

I recommend going with the Dexter DX Series Electric Over Hydraulic Brake Actuator for Drum Brakes #K71-650 with the break-away kit #20099. This actuator is powered by 12v DC, has a maximum output pressure of 1,000PSI and will work great with tandem,…

view full answer...

Answer 4

When you install a brake controller like part #90885 on a 2007 Chevrolet Silverado Classic there are additional wires under the hood that need to be connected. After you have the brake controller installed, you want to find the power distribution box…

view full answer...

Answer 5

Thank you for all of the information. Our search bar doesn't always work the best which is why you're having issues - I will hyperlink all of those parts so you can see them directly: White Powder Coat Dexstar Steel Spoke Trailer Wheel -…

view full answer...

Answer 6

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Where to Find Brake Controller Fuse and Relay for 2008 Chevy Silverado

Featured Help Information

Miscellaneous Media

Continue Researching