Brake Controller Install Recommendation for 2017 Ford Escape
Updated 06/06/2018 | Published 06/05/2018
Products Featured in This Question
Question:
I need to know if my car is supposed to have this cable when I bought the car, if so I did not get one. I bought my 2017 Ford escape last October
asked by: Tracy M
Expert Reply:
A 2017 Ford Escape does not come from the factory with brake controller wiring so you'll need to hardwire in the controller.
You will need to start with a 4-way (if you do not have one). For that you would want the # C56320.
From there you would need to convert the 4-way to a 7-way so that you can install the brake controller. For that you will want the Brake Controller Install Kit and 7-Way Adapter part # ETBC7. I attached installation instructions and an install video for this product as well.
For a brake controller I would recommend the Prodigy P3 Brake Controller part # 90195. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake controller that senses the amount of braking the tow vehicle is applying and applies a proportionate amount to the trailer brakes. This will be the last brake controller you buy. It can easily be transferred to future vehicles as well.
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Vehicle End Connector
- Powered Converter
- No Tow Package
- 4 Flat
- Plug and Lead
- Plug-In
- Hidden
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Will The Curt 4-Way Vehicle Wiring Harness Fit a 2018 Ford Escape SE?
- Q&A: Trailer Wiring Harness For 2017 Ford Escape SE
- Q&A: Easiest To Install Trailer Hitch for a 2019 Ford Escape
- Q&A: Can Fogatti Tankless Water Heater Replace Girard Model
- Q&A: Air Force One Air Jumper Kit For Spartan K2 Chassis.
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: Heavy Duty Suspension Kit for Replacing Equalizers that are 7-3/4 inches Long
- Q&A: Thickness of Rotor Portion of Kodiak 12-Inch Hub-and-Rotor Assembly KHR12D
- Article: Dielectric Grease Review
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: How to Choose the Right Trailer Hitch Class
- Article: My Trailer Hitch Doesn't Fit
- Article: Performance Chips and Modules