Can Pro Series Trailer Jack # PS1400950376 Work on 21,000 lb Rated Trailer
Updated 05/08/2018 | Published 05/07/2018
Question:
would these jacks be good on a 2010 starlite 34foot gooseneck with a 21000 lb rating?
asked by: Kurtis S
1
Helpful Expert Reply:
Yes, the Pro Series Square Jack # PS1400950376 that you referenced would work great as it has a 10,000 lb capacity. Pin weight for gooseneck trailer is typically 20 percent total trailer weight. So yours being 21,000 lbs means you'd have a pin weight of right at 4,200 lbs which the Pro Series jack would have no problem with.
expert reply by:
Jameson C
1
Continue Researching
- Q&A: Recommended Replacement Weld On Jack with 10,000 lb Capacity
- Q&A: Technical Diagram Of 10000lb Pro Series Square Jack - Drop Leg w/ Spring Return
- Q&A: How To Determine If Boat Trailer has 10 Inch or 12 Inch Brake Assemblies
- Article: Trailer Wiring Diagrams
- Q&A: Can Wheel Studs Be Installed in Trailer Hub That Uses Wheel Bolts
- Q&A: Connecting Rod for 25K etrailer Square Heavy Duty Jacks
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Q&A: How to Replace Interior Ram Jack Rod and Nut # TJD-12000-RODNUT on 12000 Series Jacks
- Q&A: Trailer Jack Recommendation For 14,000 Lb A-frame Dump Trailer
- Article: Trailer Jacks
- Article: Slipper Spring Trailer Suspension System Review
- Article: Double-Eye Trailer Suspension System Review
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide