Replacement Coupler for a Atwood 8.5k 80101

Updated 03/21/2026 | Published 03/18/2026

Products Featured in This Question

Demco 50-Degree A-Frame Trailer Coupler w/ Jack Hole - eZ-Latch - Primed - 2-5/16" Ball - 21K

(222)

$161.19

A-Frame Trailer Coupler - Thumb Latch - Black - 2-5/16" Ball - Weld On - 14,000 lbs

(150)

$42.74

Question:

Hi, I have a Atwood 8.5k 80101 a frame trailer coupler on my trailer. The ball size is 2 5/16. These are non locking latches and mine is pretty worn out. I was wondering if I could get a few options on what I could replace it with. Thanks.

asked by: Glenn G

Expert Reply:

Hey Glenn, thanks for the information!

For an upgraded replacement option, I recommend the Demco 50-Degree A-Frame Trailer Coupler w/ Jack Hole item # 12660-97SP. This coupler has the same fit as your Atwood but it has an upgraded latch that makes connecting and disconnecting easier.

The EZ-Latch system automatically snaps into place when you lower it down on a hitch ball. The latch is made of a polymer-nylon-resin that is corrosion proof and impact resistant. You won't have to grease it or be worried about it rusting up and being difficult to release.

The A-Frame Trailer Coupler item # CA-5400-B is the closest replacement option we have for your Atwood 8.5k 80101 features wise. It has a 2-5/16" coupler and fits the same 50 degree a-frame. This weld on coupler also includes pre-drilled holes for a trailer jack that fits a standard a-frame pattern.

What kind of trailer do you have?

You can add this information, along with any other questions you have, where it says Add Comment.

expert reply by: Jerred H

CA-5400-B
(click to enlarge)

12660-97SP
(click to enlarge)

Julian

3/20/2026

Best coupler ever i have it on 2 trailers never had an issue , never have to worry if ball is locked since its automatic

Jerred H.

3/21/2026

@Julian Thank you so much for leaving that feedback Julian!

Steve

3/20/2026

Best coupler I’ve ever had , easy install

Jerred H.

3/21/2026

@Steve Thank you Steve!

Mike S.

3/20/2026

I highly recommend the Demco with EZ-latch. I replaced the coupler on my trailer, 41 years old. 7K capacity trailer. The construction of the Demco made the original look downright silly. Installation was straight-forward simple, if you have decent fabrication skills. Hitching is very easy with this unit. The one thing I do not care about on the Demco is it requires a rather unique locking pin for security. ETrailer does carry this lock. Nothing conventional will work, that I have seen.

Jerred H.

3/21/2026

@MikeS Thanks for the feedback Mike! We've got a couple of locks that will work with the Demco item # 12660-97SP. etrailer Surge Brake Coupler Lock item # e98888 Master Lock Trailer Coupler Lock item # ML389DAT