Parts Needed to Tow 2003 Chevy Tahoe Behind Motorhome
Updated 05/08/2018 | Published 05/06/2018 >
Products Featured in This Question
Question:
Does my 2017 RV with the Ford V10 engine have the power to tow a 2003 Chevy Tahoe Z71 4x4. The Tahoe weighs 6800lbs. If so what do I need? Thank you.
asked by: Jim K
Helpful Expert Reply:
In order to verify that your RV can safely pull your Chevy Tahoe, I recommend contacting the RV manufacturer directly for its specific capacities. If you provide them with the RV's VIN, they should be able to give you its exact limits.
If you find that you can pull your Tahoe, you will need a base plate kit, tow bar, safety cables, lighting solution, and a supplemental braking system. You will also want to check the owner's manual for your Chevy Tahoe for any specific guidelines or restrictions when it comes to flat towing.
Starting with the Base Plates, I recommend the Roadmaster MX Base Plate Kit # 199-6. These brackets are confirmed to fit your Tahoe and are designed specifically for heavier vehicles like this one. The hidden brackets and removable front arms allow for a clean look when you aren't towing.
Then for a compatible tow bar, I recommend the Roadmaster BlackHawk 2 All Terrain # RM-422. This is an excellent tow bar with a non-binding design that allows for easy release at any time, even on unlevel ground, and extra-long telescoping arms for beter maneuverability and easier towing. It features a weight capacity of 10,000 pounds.
For the requires safety cables, you can use the Roadmaster # RM-653.
For a lighting solution, I really like the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267. This kit will let you wire your Tahoe to accept the RV's tail, brake, and turn signal lights for flat towing. It includes a 6-Way connector that you will install at the front of the vehicle, and enough coiled wiring to go from there to the 7-Way on the RV.
I recommend the Blue Ox Patriot # BLU37TR for the required supplemental braking system. This is a great, proportional system that will physically press down on the brake pedal in your Tahoe at the same time and with the same intensity that you apply to it in your RV.
Finally, you will also likely need a high-low adapter in order to keep the tow bar level. I have attached an article that explains how to choose the best one for your setup, along with a link that will take you to our available selection. I have also included installation notes and videos on the products mentioned, and a couple additional articles on flat towing that you might find helpful.
Product Page this Question was Asked From
Roadmaster Direct-Connect Base Plate Kit - Removable Arms
- Tow Bar Base Plate
- Removable Draw Bars
- Hitch Pin Attachment
- Partially Hidden
- Roadmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media






Continue Researching
- Shop: Base Plate for Tow Bar
- Article: Roadmaster Vehicle Specific Base Plates
- Shop: Vehicle Tow Bar Brake System
- Search Results: base plate
- Shop: etrailer Hitch Pin Alignment Collar for Hitch Accessories - 2" Hitches
- Shop: Roadmaster Direct-Connect Base Plate Kit - Removable Arms
- Video: The Low-Down on the etrailer Hitch Pin Alignment Collar for Hitch Accessories
- Search Results: roadmaster base plates
- Shop: Roadmaster Direct-Connect Base Plate Kit - Removable Arms
- Q&A: Parts Needed to Flat Tow a 2003 GMC Sierra with a Roadmaster Falcon 5250 Tow Bar
- Q&A: Flat Towing Setup to Move 2005 Chevy Silverado 2 Miles to Different Jobsite
- Q&A: Replacement AC Unit for Dometic Duotherm 630035.321
- Q&A: Parts Needed to Flat Tow a 2005 GMC Sierra 1500
- Q&A: Is a 2005 Chevy Z71 4x4 Flat-Towable Behind a Motorhome?
- Q&A: Flat Towing Parts Needed for a 2006 GMC Yukon XL
- Q&A: Flat Towing Recommendations For A 2004 GMC Sierra 1500 Z71 4x4
- Article: Flat Towing Package for 2007-2018 JK Jeep Wrangler and Wrangler Unlimited
- Article: The Definitive, Step-by-Step Flat Towing Setup Guide

