How to Use Bike Rack While Flat Towing Vehicle Behind RV

Question

Question:

We have a Blue Ox tow hitch on our motorhome. We would like to add a bicycle rack to it. We tow our Jeep. I do not see any photos of the bike rack with a tow behind. Is there an additional part extension, etc. that would be needed to still tow the Jeep?

asked by: Trish K

0

Expert Reply:

In order to use a hitch-mounted bike rack like the Swagman Original # S64152-2 that you were looking at while towing a vehicle, you will just need to add the Roadmaster Dual Hitch Receiver Adapter # RM-077-4. This adapter will slide into the 2 inch hitch receiver on your RV to provide two, 2 inch receivers on the other end. The bottom receiver can be used for your Blue Ox tow bar, while the top receiver can be used for a hitch-mounted accessory like the Swagman Original bike rack.

I have attached a short video demonstration on this product that you can also take a look at.

expert reply by: Chris R

0

Jeff

7/26/2020

Is there a problem with the turn radius, when doing this

Chris R.

7/30/2020

Potentially. If you go this route you'll just need to be mindful of how much clearance you have when making sharper turns. It's probably a good idea to take the whole setup up to an empty parking lot before the first trip to test everything out.

Bill

5/20/2021

when using this setup will you still be able to fold and stow the tow bar? I am considering a roadmaster Nighthawk tow bar and it folds up then rotates over to stow and I am thinking that the bike rack would prevent that. Is there a solution other than removing the bike rack?

Jon G.

5/20/2021

You could possibly remove the tow bar instead prior to folding the arms in. Aside from that you'll need to remove your bikes and bike rack. There are some of the Demco tow bars that store by moving the arms out and away from each other, but that would be more costly than taking the tow bar out.

Greg S.

11/13/2021

My question comes with a slightly different problem. We have a heavy duty bike cover to cover our two bikes and I think it hinders visibility of the turn signals and brake lights when the rack and bike cover is mounted on the motorhome. I would prefer to put the bike rack above the tow bar use a towing multiplier and NOT mounted on the Jeep. Therefore when towning the Jeep people behind me have a clear view of the Jeep’s turn signals and brake lights. All the connections seem to work. Is this doable?

Les D.

11/18/2021

@GregS I think you want the same setup as in the post you commented on. You can use the Roadmaster # RM-077-4 Dual Hitch receiver on the back of your RV, using the bottom receiver to tow your Jeep, and the top receiver to mount your bikes with covers. As others have mentioned, you should consider your turning clearance with bikes mounted behind the RV.

Mike Z.

8/7/2024

Chris , do you still have the video showing RV mounted bike rack and hauling a flat tow?

Chris R.

8/7/2024

@MikeZ Hey Mike, I attached the video below.

Helpful Links

tv-review-roadmaster-dual-hitch-receiver-adapter-rm-077-4.aspx

Answer 1

Hey Kevin! For a bike rack that is rated for motorhomes and can handle your XP4 750 e-bikes I recommend the Hollywood Racks RV Rider Bike Rack #HLY64FR. Your bikes weigh 62 lbs each and this has a capacity of 80 lbs per bike. It also uses padded…

view full answer...

Answer 2

In order to both carry bikes and flat-tow a vehicle at the same time, you'd need to use an adapter on the motorhomes hitch, I recommend the Roadmaster Dual Hitch Receiver Adapter like part #RM-077-2 as it's designed for this exact purpose. In…

view full answer...

Answer 3

You are going to want to use the Roadmaster Dual Hitch Adapter #RM-077-4. Since the bike rack is going behind your motorhome and carrying E-Bikes I recommend the Hollywood Racks RV Rider Bike Rack #HLY64FR as it is rated for use behind motorhomes and…

view full answer...

Answer 4

The TST TPMS for RVs part #TST-507-FT-6-C is what I recommend using to monitor the tire pressures on both the motorhome and towed vehicle. This system uses the flow-through sensors which will be best because motorhomes usually have valve stem…

view full answer...

Answer 5

A simple license plate holder that will get the job done is the Yakima PlateMate #Y02713. This installs on the bike rack or bikes using some hook and loop straps in multiple places so you can get the license plate in the best position. Attached is a…

view full answer...

Answer 6

Hey Jerry, thanks for reaching out. We do offer the Kenda Karrier S-Trail ST145/R12 Radial Trailer Tire #AM10140 pre mounted on a wheel. Take a look at the following: - Kenda Karrier S-Trail ST145/R12 Radial Tire w/ 12" Galvanized Spoke Wheel -…

view full answer...

Answer 7

Yes, this is exactly what the MaxxTow Dual Hitch Extender for 2" Trailer Hitches, #MT70070 is intended for. However, keep in mind that per manufacturer this reduces your hitch rating by 50%. The extender has a weight rating of 400 lbs. tongue…

view full answer...

Answer 8

I will start by saying I can find nowhere that says your 2020 Jeep Grand Cherokee needs to have the battery disconnected in order to be flat towed. However, I did find a few things about people contacting the Jeep Product Information Center and them…

view full answer...

Answer 9

The Blue Ox Tow Bar Wiring Kit part #BLU79FR is a fit for a 2023 Jeep Wrangler with LED lights. The harness simply plugs in behind the tail lights like most trailer wiring harnesses, the connector is the same on both incandescent and LED models so…

view full answer...

Answer 10

It sure will Danny and thanks for all the detailed information! The 50 Amp Furrion Automatic Transfer Switch item #F50ATS is exactly what you need. It is compatible with your WFCO AC Distribution Panel and is going to work great with your Onan…

view full answer...

Answer 11

Yes, the Internal Tire Sensor for TireMinder TPMS #TM36FR will work with your TireMinder Smart TPMS for RVs like part #TPMS-APP-4. According to TireMinder the internal sensor is compatible with all of their kits aside from the Solar Powered TPMS kit…

view full answer...

Answer 12

The folks at JR Products who manufacture the Pressure Pro TPMS systems have confirmed that the #3722SEN sensors would be compatible with the TPMS system used on your Tippin Phaeton as long as the system on your coach is a Bluetooth system that uses…

view full answer...

How to Use Bike Rack While Flat Towing Vehicle Behind RV

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching