Recommended Brake Controller Wiring Harness for 2018 Jeep Cherokee with Factory Tow Package

Updated 04/23/2018 | Published 04/20/2018

Products Featured in This Question

Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In

(79)

$15.79

Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Pigtail - Jeep

(5)

$19.50

Curt Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In

(13)

$11.41

Question:

I BROUGHT A BRAKE CONTROIIER FROM YOU,BUT GOT THE WRONG WIRING HARNESS.EVEN THOUGH MY JEEP HAS THE TOWING PACKAGE WITH THE 7-4 PLUG IN,I STILL DONT HAVE A PLUG TO PLUG MY TRAILER BRAKE CONTROLLER IN. WHAT DUE I NEED TO GET THIS DONE

asked by: Bradley K

Helpful Expert Reply:

I did not find your order based on your email address, but if you have a Tekonsha or Draw-Tite brake controller you will use wiring adapter # 3014-P. If you have a Curt brake controller, you will use wiring harness # C51459. For any other controller I recommend using the pigtail # 3014-S.

The connector is behind the black cover located to the left of the steering column, just above the carpet. It will have a cover that will need to be removed. I've attached a photo to assist.

expert reply by: Jason S