Compatibility of Valterra Sink Drain and Camco Drain Trap

Question

Question:

Does the #A01-2011VP Valterra Sink Drain fit the CAM#37262 drain trap? Thank you.

asked by: Larry M

0

Expert Reply:

The Valterra Sink Drain with Strainer Basket # A01-2011VP works with standard 2-1/8 inch diameter RV sink drain holes and fits 1-1/2 inch P-traps. It will not work with the Camco # CAM37262 but the Valtera drain does have an adapter with it that works with 3/8 inch hoses as well.

expert reply by: Jason S

0

Answer 1

The Valterra Flush Mounted Telescoping Water Inlet for RVs part #R920BK is designed to be installed on the exterior of the trailer out in the open. If you have some sort of cover to place over the water inlet you can do this but it's not required…

view full answer...

Answer 2

I have attached a photo of the Camco RV Drain Hose, part #CAM37420 for you. This drain hose features a Polypropylene trap on one end to attach to the shower or tub drain, and has a 25 inch hose with a plastic evacuation flange on the other end. As…

view full answer...

Answer 3

To be perfectly honest, unless you're pretty knowledgeable when it comes to RV wiring, you'd be well served by having somebody look at your travel trailer. The discoloration you mention tells me that this has probably been an ongoing problem,…

view full answer...

Answer 4

Hey Curtis, The keyed alike options for both the Global Link Cam Lock #295-000003 and Entry Door Lock #295-000002 are specific to themselves so there would not be a way to get them both keyed alike to each other, aside from just luck. These get…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 12

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Compatibility of Valterra Sink Drain and Camco Drain Trap

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching