What Size Ball Is Used On the 5 Inch Furrion Vision S Wireless RV Backup Camera System

Question

Question:

What is the diameter of the ball?

asked by: David S

0

Expert Reply:

In regard to the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision part # FOS05TASF, the diameter of the ball on the suction cup mount (Replacement Suction Cup Mount for Furrion Vision S Wireless RV Backup Camera System part # FR79SR) is .85".

In regard to the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision part # FOS43TASF, the diameter of the ball on the suction cup mount (Replacement Suction Cup Mount for Furrion Vision S Wireless RV Backup Camera System part # LC776462 ) is .60".

If this is not what you are asking please just let me know.

expert reply by: Conner L

0

Answer 1

The ball of the Replacement Suction Cup Mount for Furrion Vision S Wireless RV Backup Camera System #LC776462 is 0.60 inches in diameter.

view full answer...

Answer 2

Hey Lisa, thanks for reaching out. Yep this is a pretty common issue with these brake systems. The best way to resolve it is with a charge line kit like part #RM-156-25. This allows the towed vehicles battery to draw a charge from the motorhomes…

view full answer...

Answer 3

*Updated From Below Hi Michael; I'm sure you're right, it is probably prepped for the Furrion. Since Furrion is phasing out the old Vision S, and parts won't be available soon, you want to get the new Furrion Vision S+ Wireless RV Backup…

view full answer...

Answer 4

Hey Bill, yes the Furrion Vision S+ #FR64AD would be a direct replacement for your current Vision S system. None of it is backwards compatible with the standard Vision S system though.

view full answer...

Answer 5

Hey Leigh, the Furrion Vision S observation systems are the best and most reliable options out there as they have proven to have the best reception and overall reliability. For a version that comes with a 5 inch monitor we have the part #FOS05TASF or…

view full answer...

Answer 6

Hey, Dan! Congrats on your new camper. Sounds like you’re good to go with the B&W Tow & Stow #BWTS20037B! Based on the dry weight being 7,600 lbs, I’m going to assume your trailer’s coupler has a 2-5/16" ball. The 2-5/16" ball on…

view full answer...

Answer 7

Hi Eric, It sounds like you have a Furrion S Wireless Back-Up Camera System like part #FCE48TASL-05, which has a back up camera and two side cameras with integrated LED lights. The Furrion S Wireless Systems are only compatible with Furrion Vision S…

view full answer...

Answer 8

I went out to the warehouse and measured the ball size of the Replacement Suction Cup Mount for Furrion Vision S Wireless RV Backup Camera or Observation System part #FR79SR for the 5" and 7" screens and it measures .85".

view full answer...

Answer 9

I checked with Furrion and the 7 inch and 5 inch monitor version of the Furrion observation system #FOS05TASF use part #FR79SR. The smaller 4.3 inch size use the part #LC776462. The ball of the #FR79SR is 0.85" or 21.59mm and the ball of the…

view full answer...

Answer 10

Hey Mike, your 2025 Chevy Silverado 2500HD will have the power issue with the Furrion Vision S + #FR57AD that you have so you would need a solution like the part #VGR64VR that you referenced. Or if you don't want to mess with any wiring you could…

view full answer...

Answer 11

Hey Mary! The 12V PWM Filter #VGR64VR will work with the Furrion camera and prevent any issues with the PWM from your 2020 Sierra. However, I do recommend getting the Furrion Vision S+ #FR57AD over the old Vision S. They use the same mount so this is…

view full answer...

What Size Ball Is Used On the 5 Inch Furrion Vision S Wireless RV Backup Camera System

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching