How to Hardwire the MaxxFan Deluxe Roof Vent w/ 12V Fan Part # MA00-07500K

Updated 03/16/2018 | Published 03/14/2018

Products Featured in This Question

MaxxFan Deluxe Roof Vent w/ 12V Fan, Thermostat, and Remote - Powered Lift - 10 Speed - Smoke

(1405)

$404.05

Replacement Mini-Rocker Switch for Ventline Ventadome Trailer Roof Vents

(32)

$16.00

Question:

If installing into vent opening which does not currently have a fan, 2018 Flagstaff Ultralight 29RKWS, how likely am I going to find electrical wiring readily available to power this unit? a different powered fan was an option for this location over the bed. If not, how difficult is it to route wiring through the ceiling? Thanks!

asked by: Mark

Expert Reply:

In order to determine if the wires for a vent fan are already ran in your 2018 Flagstaff Ultralight 29RKWS, you would need to obtain the VIN and contact the trailer manufacturer as we would not have this information.

However, if you do not already have pre-existing wires to attach the MaxxFan Deluxe Roof Vent w/ 12V Fan part # MA00-07500K to then this will not be a big deal as there are only two wires on the fan that need to be installed. This is the white wire for the ground and the black wire for the power. The black power wire will need to be first ran to a 12 volt switch like part # BL0108-00 and then to the battery with a 10 amp fuse placed 6" from the positive post. Please note that the switch will also need to be grounded.

expert reply by: Conner L