Best Way to Attach Leveling Scissor Jacks # JSC-30 to 2 inch Wide Frame

Question

Question:

my frame is like 2in wide. will 2 screws hold them in place 1 on each side of the mounting plate I have all ready purchase a set. thank you

asked by: Garry

1

Helpful Expert Reply:

For attaching to a 2 inch frame you'd be best served welding the Leveling Scissor Jack Set # JSC-30 since there wouldn't be enough width to get several bolts to it.

expert reply by: Jameson C

1

Answer 1

I have attached a photo below of the Performance Tool Electric Car Jack part #PTW1609 dimensions. The base measures 7" long x 5" wide x 5-14" tall.

view full answer...

Answer 2

The Leveling Scissor Jack Set, item #JSC-24, is designed as a leveling, stabilizer jack, that is to be bolted to the frame of the trailer. If you could find a location close enough to the wheel and tire to mount the jack securely, then the 5,000…

view full answer...

Answer 3

The FasTen RV Leveling Blocks w/ Carrying Handle #CAM44512 can definitely be used to help jack up your travel trailer but then you'll want to add some chocks like part #FHG97ZR on either side of your tires to help ensure your trailer won't…

view full answer...

Answer 4

For a triple step the better suited hand rail option is the part #AC-530 which is 38 inches tall. The part #AC-544 would be a bit too tall and would not be ideal.

view full answer...

Answer 5

Those are some good options, and the best overall upgrade (without getting too crazy like you said!) for your Jayco with tandem 3,500 lb axles is going to be the MORryde CRE3000 with the X-factor crossmember. The Road Armor is good, but the…

view full answer...

Answer 6

The hand rail with the largest handle would be the Stromberg Carlson #AM-533 you'd looked at. The hand rail also features a padded handle on the lower end of the bar for a comfortable grip when you're climbing that first step. I have no way…

view full answer...

Answer 7

Thank you for the images. The MORryde Rubber Equalizers #MR87ZR are the correct set for your 2020 Keystone Outback Ultra-Lite 291UBH. You will pair this with the MORryde Suspension Upgrade Kit #MR46ZR. Instead of using the wet bolts included with the…

view full answer...

Answer 8

Hey Bob I got in touch with my contact am MORryde and they sent me a dimensional drawing of the MORryde Safe-T-Rail #MR54BR. The drawing indicates that the portion that attaches to the wall of the camper is 52.2" tall overall. This is including…

view full answer...

Answer 9

The hardware for the Stromberg Carlson Folding Handrail #AC-530 is no longer available as a kit. You would have to purchase the entire kit. If you will be drilling and mounting into a stud you will only need the correct screws which are as follows.…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Best Way to Attach Leveling Scissor Jacks # JSC-30 to 2 inch Wide Frame

Product Page this Question was Asked From

Continue Researching