Quick Splice and Circuit Tester for Tapping into Vehicle Reverse Light

Updated 02/23/2018 | Published 02/22/2018

Products Featured in This Question

Quick Splices - Self-Stripping Connector - Closed Port - 10-12 Gauge - Yellow - Qty 1

(65)

$2.06

Hook Probe Circuit Tester

(71)

$13.14

Question:

i was wondering if you could help me. i own a 2017 dodge journey. im installing a backup camera to my new journey and was wounding if you have a wiring harness that will connect to the reverse light that is on the inner driver side on the tail gate. so that when i put the car in reverse the camera will turn on. i dont like cutting into factory wires so im looking for a wire harness so i can connect the positive wire from the camera to it. any information will help. thank you for your time.

asked by: RN

Expert Reply:

None of the trailer wiring harnesses we offer are designed to tap into the circuit you need. Only option would be to use a quick splice like part # SWC501915-1 to tap into the circuit after probing the wiring for the reverse light with a tester like part # PTW2993.

expert reply by: Jameson C