Dimensions of Camco RV Cutlery Tray CAM43508

Question

Question:

my older trailer has pretty small cabinets and drawers. they were custom-made by the original owner who was a carpenter. they are very nice but not very roomy. the inside of the drawers is 8 x 12-1/2-inches and they are 2 inches deep.

asked by: Ron

0

Expert Reply:

The Camco RV Cutlery Tray # CAM43508 has overall dimensions of 7 x 12-inches (and it is 1-1/2-inches tall) so it will fit just fine in your older trailer's kitchen drawers. The tray has 4 separate spaces for your various cutlery items. You can get a good look at it in the linked review video.

expert reply by: Adam R

0

Answer 1

I went out to the warehouse to take a look at the Camco RV Cutlery Tray #CAM43508 referenced in your question. The three equal sections measure 9-3/8 inches long and 2-1/4 inches wide. The single section on the end of the tray measures 6-1/2 inches…

view full answer...

Answer 2

Hey Diana, it's pretty rare to find trailer jacks that have the narrower inner tube like you need so if you can have your coupler modified to fit the 2 inch size not only would you be able to use the part #e88GV that you referenced but its going…

view full answer...

Answer 3

Yes it will; Lippert has verified the correct replacement for your 175226/12656 control brain is indeed the following: - Replacement Lippert Leveling Control Brain for 4-Point Leveling System #LC53ED

view full answer...

Answer 4

The bolts that come with this kit are #24-9x1 inch self tapping screws. We sell them individually, they are Self Tapping Screw for Sway Control Ball Plate Assembly, part #3403. Since the bolts were pulled out of the holes there is a chance that they…

view full answer...

Answer 5

Hey Michael, the WeatherTech Roll Up SunShade Kit - Front and Side Windows #WT42UK that you referenced is basically a friction fit in how it attaches to the windows. Basically they are light enough and stiff enough that you would just push them up…

view full answer...

Answer 6

Hey Bo, In order to find the correct replacement shroud for your AC unit we'll need to know exactly what it is. Furrion and Advent Air stuck to one size while Coleman, Dometic, and a few other manufacturers went with multiple sizes depending on…

view full answer...

Answer 7

You should go with the Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 14,000 lbs GTW, 1,400 lbs TW, part #EQ37140ET. This option will work with tongue weights from 1,000 lbs to 1,400 lbs. I have included a product description link…

view full answer...

Answer 8

They sure will Bud! The Roadmaster Falcon 3HD Tow Bar item #RM27NQ is compatible with the same D-Ring adapters like item #RM-035-1 or item #RM-035 as the older Falcon 2 tow bar item #RM-520. The difference between the tow bars is increased capacity…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 11

Hi Mark, You shouldn't need to use the Furrion 7-Way Vehicle Power Adapter part #FR87PR because your 2018 Ram 2500 is from the fourth generation of the Ram 2500 before they did the huge overhaul that changed the circuits and resulted in the newer…

view full answer...

Dimensions of Camco RV Cutlery Tray CAM43508

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching