Size Bolts Used to Install Friction Sway Control Unit on a Trailer
Updated 06/26/2015 | Published 06/25/2015
Question:
3 OF MY SCREWS PULLED OUT OF THE TONGUE WHEN I GUESS I TURNED TO SHARP. WHAT WOULD BE THE NEXT SIZE UP FOR THE SELF TAPPING SCREWS SO I CAN REATTACH MY SWAY BAR MOUNT TO THE TONGUE OF THE TRIALER ? THANKS, RIC
asked by: Ric B
Expert Reply:
The bolts that come with this kit are # 24-9x1 inch self tapping screws. We sell them individually, they are Self Tapping Screw for Sway Control Ball Plate Assembly, part # 3403.
Since the bolts were pulled out of the holes there is a chance that they are misshaped so you may not be able to just go with the next size larger screw. Your best option would be to drill out the holes and then use a tap to thread them and then go with matching bolts to attach the plate.
Continue Researching
- Search Results: trailer hitch ball mount
- Video: All You Need to Know About the etrailer Ball Mount w/ Pre-Torqed 2" Ball
- Search Results: trailer hitch
- Search Results: 2 inch ball trailer hitch ball mount
- Shop: etrailer Ball Mount w/ Pre-Torqued 2" Ball - 2" Hitch - 2-3/4" Rise - 7,500 lbs
- Q&A: Availability of Ball Mount with 4 inch Rise with 2 inch Hitch Ball
- Shop: TowSmart Ball Mount for 2" Hitches - 4" Rise, 5-1/4" Drop - 5,000 lbs
- Shop: Curt Fusion Ball Mount for 2" Hitches - 2" Ball - 2-1/4" Rise - 7,500 lbs
- Video: The Low-Down on the etrailer Ball Mount w/ Pre-Torqed 2" Ball
- Search Results: self tapping screw