Will Slipper Spring Hanger # 115706S Work with a 2 or 3 Slipper Spring
Updated 06/22/2011 | Published 06/19/2011
Question:
will this slipper spring hanger work for 2 or 3 leaf spring?
asked by: Tim
0
Expert Reply:
As long as the slipper spring you have has a width of 1-3/4 inches and the spring eye diameter is 9/16 of an inch this Rear Hanger for Slipper Spring # 115706S would work well for you.
I attached an FAQ article on slipper spring trailer suspension for you to check out also.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Rear Hanger for 1-3/4" Slipper Spring
- Trailer Suspension Parts
- Hangers
- Camper
- Car Hauler
- Utility Trailer
- Slipper Springs - 1-3/4 Inch
- 9/16 Inch Diameter
- Single Axle
- Tandem Axle
- Triple Axle
- Redline
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Can Trailer Suspension Hangers be Bolted On
- Video: An In-Depth Look at the Rear Hanger for 1-3/4" Slipper Spring
- Video: What to Know About the CE Smith Rear Hanger Bracket for Trailer Slipper Springs
- Shop: Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear
- Shop: Single-Axle Trailer Hanger Kit for 1-3/4" Slipper Springs - 1-1/2" Tall Front
- Shop: CE Smith Rear Hanger Bracket for Trailer Slipper Springs - Galvanized Steel - Bolt On - Qty 1
- Video: All You Need to Know About the CE Smith Front Hanger Bracket for Trailer Slipper Springs
- Q&A: How To Mount Redline Rear Hanger # 30-20 On A Trailer
- Q&A: Do Trailer Slipper Springs Normally Slip Out of their Rear Hangers
- Q&A: Bolt On Slipper Springs for 1-3/4" Wide Slipper Springs on a Small Single Axle Trailer
- Q&A: Mounting a Rear Slipper Spring Hanger
- Shop: Spring-Eye Bolt with Locknut for Slipper Springs - 3-1/2" Long
- Shop: Rear Hanger for 2" Wide Slipper Springs - 5-1/4" Tall - 5/16" Bolt Hole
- Shop: Rear Hanger for 1-3/4" Slipper Spring
- Shop: Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 7/8" Rear
- Q&A: Do Slipper Spring Rear Hangers Require Bushings
- Q&A: Are Taller Hangers Available For A 1-3/4" Wide Slipper Spring