Electric Winch Recommendation Needed for a 20 foot Throphy Boat

Question

Question:

The weight of 20 foot throphy is 3400lb And the bunks are carpeted

asked by: Stephen T

1

Helpful Expert Reply:

It really depends on the weight of your boat. For example the Dutton-Lainson TW4000 StrongArm Electric Winch # DL25200 has a weight capacity of 1,500 lbs but can pull up to a 4,000 lb boat under the right conditions.

These conditions just have to do with how much resistance your boat will be experiencing. I have attached a helpful article that goes into more detail about this that you can use, or you can let me know how much your boat weighs and what kind of bunks you have and I can make a different recommendation if need be.

expert reply by: Jon G

1

Stephen T.

12/28/2017

The weight of 20 foot throphy is 3400lb And the bunks are carpeted

Jon G.

12/28/2017

Since it is rated for up to a 4,000 lb boat you could probably get by with the Dutton-Lainson TW4000 # Dutton-Lainson TW4000, but I recommend going with the Dutton-Lainson StrongArm # DL25215 though because it is rated for a 9,000 lb boat and will have a much easier time pulling your boat onto your trailer with carpeted bunks. This winch is at a higher price point, but it will last much longer because it won't be straining to pull your boat, plus if you end up swapping out your boat for a slightly heavier one you may not have to replace your winch as well.

Answer 1

In order to suggest the correct replacement winch, you'll need to pick a winch with a capacity at least half (or more) of the weight of the boat. Choosing a winch is one of those times when you'll want to use a little overkilll as far as the…

view full answer...

Answer 2

I attached links to this page that have all of the dimensions for the Fulton F2 Trailer Winch #FW32000101 that you referenced. When looking at it from the front the winch will have an overall width of 14.77", which includes the extension from…

view full answer...

Answer 3

The shortest replacement handle Fulton offers for your #F142425 XLT hand winch is the 9 inch long #F501109. Keep in mind that shortening the handle length by one inch will increase the cranking effort.

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 9

Douglas thanks for the photos and the details really helped. For your 2020 Ram 2500 short bed without the OEM puck system, I recommend this setup: B&W Companion Sliding 5th Wheel Hitch w/ Turnoverball for Ram #BW28QR This gives you a removable…

view full answer...

Electric Winch Recommendation Needed for a 20 foot Throphy Boat

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching