What is the Height With and Without Rise on Ball Mount for 2016 Ford Fusion

Published 12/07/2017

Products Featured in This Question

Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"

(487)

$173.29

1-7/8" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Stainless Steel - 2,000 lbs

(343)

$34.76

2" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Stainless Steel - 3,500 lbs

(343)

$37.47

Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 9-3/8" Long - 3,500 lbs

(2282)

$41.29

Curt Hitch Pin and Clip for 1-1/4" Hitches - 1/2" Diameter x 2" Span

(2948)

$3.42

Question:

I have a 2016 ford fusion and am thinking about putting this hitch on. can you tell me the height from ground the ball would be on this?

asked by: Ben

Expert Reply:

For your 2016 Ford Fusion, the Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" # C12091 is a confirmed fit. This hitch will be 10-3/4 inches from the ground to the inside top of the receiver opening. When using a ball mount like # C45016, this will give you a 2-5/8 inch rise from that location giving you 13-5/8 inches from the ground in that rise position. In the drop position, the top of the mount or bottom of the actual hitch ball will be at 7-3/8 inches from the ground. The bottom plate of the mount and the nut on the bottom of the ball still need to be accounted for, so you will be at roughly 6 inches ground clearance in that drop position. Most of the time you will be in the rise position which will put the lowest point at the actual hitch of about 9-1/4 inches. You may want to consider a ball mount like the # 36065 to get closer to a typical trailer coupler level height of 16-19 inches.

The 120913 is this same hitch and ball mount as the first mentioned, and includes the pin and clip, so all that is needed in the hitch ball in addition. Unfortunately the kit has been discontinued but the parts are all available separately.

expert reply by: Jason S