Does the Replacement Tail Light Lens # AL8RB-1G Go to a Light with License Plate Function

Question

Question:

I saw a question and answer about this however I believe the light is supposed to double as a tag light. Does this unit do that?

asked by: James M

0

Expert Reply:

The Replacement Tail Light Lens for STL2RB and STL3RB # AL8RB-1G is a replacement for both the Optronics Right Hand # STL2RB and Left Hand # STL3RB lights as is indicated by the title.

The part # STL3RB does have the license plate light function built-in to it.

expert reply by: Jon G

0

Answer 1

First, disconnect the trailer from the tow vehicle so you can check the vehicle side connector. Using a circuit tester like part #PTW2993, test the functions of the connector; specifically check the right turn/brake, to make sure the signal is making…

view full answer...

Answer 2

The driver's side light that matches the LED Combination Trailer Tail Light part #STL2RB is part #STL3RB. You do not want to flip the passenger side light upside down because it has a license plate light. I recommend to use the driver's side…

view full answer...

Answer 3

What you are experiencing is common with ground connection issues. Before you get new tail lights you will first want to find the ground connection. This is generally a screw or bolt that is mounted to the trailer. It is common for trailer builders…

view full answer...

Answer 4

The Over 80" Wide, Square LED Trailer Tail Light #STL2RB that you referenced is designed to be a submersible light. What that means is that once you got to the boat ramp you would want to disconnect your trailer wiring from your tow vehicle and…

view full answer...

Answer 5

I don't see why you couldn't use the LED Combination Trailer Tail Light #STL2RB upside to replace your driver side light. The only thing that might be weird is how the light will mount to the trailer physically since you're using the…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 12

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Does the Replacement Tail Light Lens # AL8RB-1G Go to a Light with License Plate Function

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching