Wiring Diagram for Bargman 7-Way RV Style Connector # WG54006-043

Question

Question:

Hello, Do you have a wiring diagram for the Bargman 7-Way, RV-Style Connector w/ 6foot Long Coiled Cable - Trailer End Item # WG54006-043. Cable posts Wiring colors do not match up to my Hopkins #47185 Vehicle end plug.

asked by: Jim K

0

Expert Reply:

The Bargman 7-Way, RV-Style Connector # WG54006-043 referenced in your question uses the standard RV-style pin locations for its 7-Way connector. I have attached a diagram of these locations and their functions for you to check out.

Wire colors will often vary between manufacturers. The important thing is to match up trailer and vehicle wiring based on their function. The pin locations and their functions should match up between this connector and the vehicle side Hopkins # 37185 that you referenced having installed.

expert reply by: Chris R

0

click to enlarge

Answer 1

The Entegra Coach Vision is built on a Ford F-53 Chassis which means there should be a pre-wired brake controller port under the dash. The exact location of this port can vary but most likely it will be on the left side of the steering column support…

view full answer...

Answer 2

My research indicates that the Coleman part 4716A1071 refers to a Dexter 7 x 2-inch hub/drum with a 5-lug pattern. We have several options in this size hub/drum that are displayed on the linked page; all have the 5-on-4-1/2 bolt pattern and all are…

view full answer...

Answer 3

I do have an option for you but the most realistic solution would be to replace the entire coupler which I know is not ideal since they are welded-on. That said, coupler repair kits are not universal and although I don't know which exact coupler…

view full answer...

Answer 4

We have a nice selection of repair kits available for A-frame trailer couplers. The kit you need will depend on what type of coupler you have and its manufacturer. For example, the etrailer Repair Kit #CA-5100-RK that you were looking at is designed…

view full answer...

Answer 5

We do carry the Kenda 205/65-10 Bias Trailer Tire with 10" White Wheel #AM3H430 which is a load range D version of the #AM3H390 with a load range C. Both tires have the 81mph speed rating but the load range D is capable of supporting 1,320lbs…

view full answer...

Answer 6

There is not a universal latch repair kit. You will have to match the correct repair kit to the correct coupler. You are not able to use another brand repair kit on another brand coupler. Normally the coupler information is engraved on the coupler.…

view full answer...

Answer 7

For your 1999 Coleman Sea Pine, the Bearing Buddy caps you will want are the Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair) #BB1980A-SS. These will be driven into place on your 7 inch hubs. I confirmed the…

view full answer...

Answer 8

In order to add electric drum brakes to your trailer you will need braking assemblies, hubs/drums, trailer wiring, and a breakaway kit. I was able to cross reference all of the parts in the photo you have attached and attached these for you below.…

view full answer...

Answer 9

You can go to a larger size tire on your boat trailer as long as the larger size will fit. If you went to a 205/75-15 tire size the width would not be an issue but it will be 0.4 to 0.8 inches taller than a 215 or 205 size 14 inch tire, respectively.…

view full answer...

Answer 10

So you have 14 inch rim that has a 5 on 4-1/2 inch bolt pattern and are looking to go to a 15 inch rim. For that you would want the part #AM32424 as it has a ST205/75R15 tire mounted to it which has a 1,820 lbs at 50 psi capacity. The dimensions of…

view full answer...

Answer 11

The RedArc Tow-Pro Elite #RED44FR is comparable in reliability and performance to the Tekonsha Prodigy P3 #90195. The difference is really in the design and features. One of the greatest aspects of the P3 is the LCD screen and presets. One of the…

view full answer...

Answer 12

Ten inch brakes will use a larger hub than 7 inch brakes. So you will not only have to change the brake assemblies but also the hubs and the wheels. If cost is not a factor then you can do all of this but it would be much easier to just replace the 7…

view full answer...

Wiring Diagram for Bargman 7-Way RV Style Connector # WG54006-043

Product Page this Question was Asked From

Continue Researching