Recommended Replacement Brakes for a Jayco Eagle Superlite 31.5 RLDS 5th Wheel Trailer
Updated 09/18/2017 | Published 09/16/2017 >
Products Featured in This Question
Question:
Like another one of your customers, I have a Jayco Eagle Superlite 31.5 RLDS 5th Wheel. The brakes are 12 inch diameter, 2 inch in width, the spindle hole is 3-1/4 inch in diameter and the spacing for the 3/8 inch bolts is 2-1/16 inch Can you recommend a replacement brake component. The whole assembly is what Im looking for. Thanks
asked by: Brian R
Expert Reply:
I recommend going with our Electric Trailer Brake Kit # AKEBRK-7-SA. This kit includes both the Left and Right hand assemblies, which come with identifying stickers, and are rated for 5.2K - 7K axles. I have attached a picture to demonstrate that they have a 3-1/4" pilot hole diameter, 4 of the 5 bolt measurements are 2-1/8" center on center, and the last measurement is 3" center on center. These are self-adjusting brakes that will work great for your application. After the initial install you don't have to worry about adjusting them again.
These brakes can also be found individually with part # AKEBRK-7L-SA being the Left hand assembly and part # AKEBRK-7R-SA being the Right hand assembly.
If you need replacement hardware you can use part # BRKH12.
I have attached review and installation videos for you to check out as well.
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 12 x 2 Inch Drum
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: reflective tape
- Search Results: trailer wire
- Search Results: trailer reflector
- Video: Feature Review Screw Mount Reflector for Truck or Trailer
- Shop: Optronics LED Trailer Tail Light - Stop, Turn, Tail - Submersible - 10 Diodes - Round - Red Lens
- Search Results: trailer bearing grease
- Q&A: Can a Hub with Outer Bearing 15123 and LM67048 Both Fit Same Spindle
- Q&A: Comparing Dexter and etrailer.com 7,000 Pound Electric Brake Assemblies
- Shop: Peterson Red Reflector for Trailer Lights - Round - 2-3/8" Diameter
- Shop: Peterson Red Reflector for Trailer Lights - Center Screw Mounting - Round - 2-3/8"
- Shop: Screw Mount Reflector for Truck or Trailer - 2-3/16" Round - Amber - Qty 1
- Shop: 7" Long White/ 11" Long Red Conspicuity Reflective Tape - 21' Roll
- Shop: Curt Jacketed 7-Wire Trailer Wiring - 100'
- Shop: Mounting Bolts and Hardware for 12-1/4" Brake Assemblies - 8,000 lbs to 9,000 lbs
- Search Results: dexter
- Q&A: Replacement Idler Hub Options For A Dexter 8-135 Idler Hub
- Q&A: Can Brakes be Removed on 3,500 lb Axle and Converted to Idler Hubs for Yard Work
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Search Results: trailer hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer tires and wheels
- Q&A: Comparing Kenda KR03, KR35, And KR53 Tires
- Shop: Suspension Enhancement
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Video: Hands-On with the Hub Saver Hub and Wheel Protector
- Shop: Brake Controller




