Distance Between Hangers Using Tandem Axle Hanger Kit
Updated 09/11/2017 | Published 09/08/2017
Products Featured in This Question
Question:
I just purchased 4 e54SR springs along with the APT5 hanger set . What is the recommended distance between the center of the equalizer bracket and the center of the spring hangers? Thanks
asked by: Gerald W
0
Expert Reply:
Since you have a tandem axle set up using double-eye springs # e54SR, the Tandem-Axle Trailer Hanger Kit for Double-Eye Springs # APT5 recommends a distance between the front and center hangers of 29-1/2" and a distance between the center and rear hangers of 29-1/2".
expert reply by:
Kyle S
0
click to enlarge
Product Page this Question was Asked From
Tandem-Axle Trailer Hanger Kit for Double Eye Springs - 3-1/4" Tall Front/Center/Rear
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Tandem Axle
- etrailer
more information >
Continue Researching
- Q&A: Suspension Parts Needed for 3,500 lb Tandem Axles and 29-1/2" Hanger Spacing
- Video: 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles Spec Review
- Search Results: double eye springs
- Article: Double-Eye Trailer Suspension System Review
- Article: What Is A Leaf Spring? (Everything You Need to Know About Trailer Leaf Suspension)
- Article: Where to Position the Trailer Axle?
- Video: Review of the Suspension Kit for Tandem-Axle Trailers
- Video: 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles: The Breakdown
- Shop: Curved Equalizer for 1-3/4" Double Eye Spring - 7-3/4" Long - 9/16" Hole
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs
- Shop: Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 7-3/4" Long - 9/16" Center Hole
- Shop: Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs - 2-1/4" Links
- Shop: 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 25-1/4" Long
- Shop: Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front/Rear, 2-1/2" Center
- Shop: CE Smith U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles - 4" Long U-Bolts - Zinc
- Search Results: sp~220275
- Search Results: hanger kit
- Search Results: suspension kits
- Search Results: sp~111275
- Search Results: sp~219275
- Search Results: pr722
- Q&A: Will Trailer Suspension Hanger Kit APT5 Fit a 2001 Fourwinds Travel Trailer
- Q&A: Replacing Trailer Leaf Spring Hangers
- Q&A: How to Determine Hanger Spacing for Tandem Axle Trailer Suspension with 26 Inch Springs
- Q&A: How To Determine Parts Needed To Replace Suspension On Tandem Trailer
- Q&A: Suspension Hanger Locations for Dual Axle Dump Trailer
- Q&A: Correct Hanger Spacing For The APT4 Kit Using 25-1/8 Long Leaf Springs