Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Mike for your Dexter 3.5k axle, you can use the 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles #e54SR. You'll want to verify that your current spring measures 25 1/8" from eye to eye, and has a 1 3/4" spring width. If…
view full answer...Thanks for all of the information, Robert! It sounds like you have the Tandem-Axle Trailer Hangers #H248 installed on your tandem axle trailer so to get your Dexter Trailer Axle w/ Electric Brakes #7359765-EB installed you need the following parts:…
view full answer...The closest tire/wheel combo we have for your application is 235/85-16. This will have roughly the same diameter and will be about 1/2" wider than the 225/90-16 tire size you're currently using. If you have a 6 on 5-1/2"…
view full answer...The hub and drums we offer for a 7,000 lb axle we offer all use 12 x 2 inch brakes. They also have an 8 on 6-1/2 inch wheel bolt pattern. I have attached a link to the hub and drums we have that are designed for a 7,000 lb axle you can check out. If…
view full answer...If you are changing from a 15 inch to a 16 inch tire and wheel you will add more height to the trailer. With the size tire you currently have on your trailer the diameter is approximately 28.87 inches tall. To go with a tire like part #AM35010 which…
view full answer...There is a hitch available for the 2020 Toyota Corolla Hatchback with Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit part #DR94FR which is a concealed cross tube design. The only portion of the hitch that is visible once installed is the…
view full answer...Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…
view full answer...The correct hangers that you need to use for the 5-Leaf Double-Eye Spring #e34SR and the Dexter Heavy-Duty Suspension Kit #K71-359-00 come in the Kit #H248. For your application these need to be spaced 29-1/2" apart on center. I have attached a…
view full answer...When changing the size of the equalizer that is on a trailer, this will affect the size of hangers needed or the spacing of the hangers. For example, if you were to go with an equalizer that is one inch taller, you could keep the center hanger the…
view full answer...You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…
view full answer...Trailer leaf springs can grow longer after many years of use. A new springs that measures 25-1/4-inches long like #e57SR could easily measure 25-1/2-inches after years in service on a trailer. Springs can lengthen as much as 3/4 of an inch. If your…
view full answer...The suspension in general on your trailer looks very worn. I would replace as much as I could on it to get it back to good working order. The problem with the equalizer cocked to one side like that can happen sometimes. It usually fixes itself when a…
view full answer...Related Searches
Filter Your Search
Contact and Help