Electric Drum Brakes and Hub/Drums for 2008 MaxSport R Vision MS 19 Tandem Axle Travel Trailer
Updated 09/07/2017 | Published 09/05/2017 >
Products Featured in This Question
Question:
Need help with the correct part#s for brake kits and drums on my 08 MaxSport R Vision MS 19 dual axle. Axles say Trail-Lite AXL0065, Lippert NV# 13207, GAWR 2800 lb. Thanks.
asked by: Wayne A
Expert Reply:
I reviewed the specs for your 2008 MaxSport R Vision MS 19 tandem axle travel trailer. The trailer's GVWR is 5454-lbs, which makes perfect sense based on the 2800-lb rating for each axle that you mentioned. The specs also note that electric drum brakes are installed only on the rear axle.
In a case like this those brakes are likely to be rated for more than the single axle 2800-lb rating. Odds are good that the rear axle with brakes uses 4400-lb-rated 10 x 2-1/4-inch brakes like Dexter # K23-462-463-00 or this same size brake in a 3500-lb rating, such as # AKEBRK-35-SA. If you pull one of the hubs you can measure it (see photo please) to confirm the size brake you need and also the size hub/drum you need. The linked page displays all electric brakes in the 10 x 2-1/4 size.
For new hub/drums you need to confirm the bearings used in the originals since the new ones have to use the same bearings in order to fit on your spindles. The pair of new hubs also has to be rated for at least the same weight as the axle. They also need to match your wheel bolt pattern, most likely 5-on-4-1/2. For instance, hub/drum # 84546UC3-EZ is rated for 3500-lb axles, has the 5-on-4-1/2 bolt pattern and uses bearings # L68149 and # L44649.
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 13 Inch Wheel
- 14 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Q&A: Comparing the eTrailer and Dexter Electric Trailer Brake Kits
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Parts Needed to Add Brakes to Ranger Boat Trailer
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Q&A: Suspension Enhancement Recommendation for Trailer with Dexter 2,000 lb Axles
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Most Popular Wheel Bearings
- Q&A: What Size Wet Bolts Come with MORryde Suspension Upgrade Kit # MR46ZR
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Difference Between Dexter and etrailer Hub/Drum Assembly for 3,500 lb Axles


