Available 7-Way Wiring Extensions for Camper Trailer

Updated 08/30/2017 | Published 08/29/2017

Products Featured in This Question

Hopkins Endurance 5th Wheel/Gooseneck 90-Degree Wiring Harness with 7-Pole Plug

(896)

$89.74

5th Wheel/Gooseneck 90-Degree Wiring Harness w/ 7-Pole Plug - GM, Ford, Ram, Toyota - 9' Long

(692)

$107.94

7-Way Molded Trailer Wire Connector, 6' Long

(391)

$45.60

Hopkins 7-Way RV Style Connector with Molded Cable - Trailer End - 8' Long - RV Standard

(925)

$46.90

Pollak Black Plastic, 7-Pole, RV Blade-Style Trailer Socket - Vehicle End

(341)

$13.18

TorkLift Wiring Harness Extension for 60" SuperTruss Hitch Extender - 7-Way RV

(25)

$130.90

Question:

I need a 7 pin to 7 pin 5 ft long extension to plug my camper into the outlet I had installed in the bed of my pick up truck. It is such a tight clearance though that I need a 90 plug on one end of the extension. Can you custome make that or do you sell such a part?

asked by: Steve S

Helpful Expert Reply:

We have exactly what you need to provide a convenient 7-way socket for your camper. If your vehicle has a bumper-mounted 7-way socket that uses a round U.S. Car type connector that plugs into the back you can use the 90-degree 7-way harness # 41157 that you referenced. This is 10-feet long. Similar part # 50-97-410 is 9-feet. Such 90-degree harnesses are usually 8 to 10-feet long.

We do offer a straight 5-foot 7-way extension, part # TLW6060, that plugs into your 7-way socket (not into the back of it like the others).

If you wanted to make your own custom-sized extension you could do so using a 7-way plug like 6-foot # H20044 or 8-foot # H20046 and wire the pigtail leads to a socket like # PK12-707E. The linked article on trailer wiring will help you do this.