Estimated Weight Capacity of 41mm Square Trailer Axle

Updated 08/15/2017 | Published 08/14/2017

Products Featured in This Question

CE Smith Trailer Axle Beam with Standard Spindles - Galvanized - 57-1/2" Long - 1.8K

(47)

$276.50

Timbren Axle-Less Trailer Suspension w/ Idler Hubs - Standard Duty - No Drop - 4 on 4 - 2,000 lbs

(111)

$1030.37

CE Smith Trailer Axle w/ Idler Hubs - 5 on 4-1/2 - 57-1/2" Long - 1.8K

(55)

$396.69

Question:

Hey, I was wondering if you were able to help me find out the capacity of my boat trailer axle. Its 41mm square, measurements of spindle are as follows. ID seal is 1-7/16 inch ID inner bearing is 1-1/4 inch ID outer bearing is 3/4 inch Hope this helps, thank you...

asked by: Peter

Expert Reply:

Thank you for the photo of your boat trailer's square axle.

Typically a square trailer axle that measures 41mm (1.6-inches) on a side will have a weight rating of 1800- or 2000-lbs. We offer one such 1800-lb-rated axle, CE Smith Trailer Axle # CE33201GA-HUB which includes idler hubs, and # CE33201GA which is the axle beam/spindles only.

We also offer Timbren axle-less trailer suspensions that entirely do away with the axle beam and leaf springs. These bolt-on kits like # A20RS440 are shown on the linked axle page. Timbren suspensions can give you much-improved ground clearance and they come with lift or drop spindles too for instances where you want to raise or lower the trailer height.

expert reply by: Adam R