Availability of a Replacement Pull Pin for Roadmaster BreakAway Systems

Question

Question:

I would like to purchase an extra pull-out plug for the solenoid trigger switch attached to the front of my towd Escape. The plug is black plastic and about 2.5 inches long. Can you help? Thanks

asked by: Ken Y

0

Expert Reply:

We do have the replacement pull pin (key) for Roadmaster BreakAway systems. You will need part # RM-200200-20. It's also worth mentioning, we do have a complete replacement break away switch for Roadmaster break away systems, part # RM-650898. This part will include the switch and a new key as well.

I've also included a link of our complete selection of breakaway pull pins for you to check out.

expert reply by: Michael H

0

Answer 1

The replacement breakaway pin for the InvisBrake #RM-8700 is the #RM-200200-20 that you referenced. It is the correct replacement switch key for the Roadamster Even Brake and Brake Pro Breakaway systems, and it will also fit your InvisiBrake system.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Hello Charles, Thanks for finally finding a reason to write into us! I see you've been a faithful etrailer neighbor since 2017. It looks like you're no stranger to flat towing, just setting up a new ride. For your 2025 Ford Bronco Heritage…

view full answer...

Answer 4

Hey Don, thanks for the detailed parts breakdown and for the pictures. That really helps, and I can definitely help. You already have a good bit of gear, and we'll be able to re-use most of what you have. You'll need a new base plate for your…

view full answer...

Answer 5

Hi Mark; have you tried looking behind the center dash storage pocket? Technically on the vehicle the location is BH7. It will be similar to the attached picture on an Expedition. You can also take a look at the installation video I attached further…

view full answer...

Answer 6

Hey Brian. Sorry but there are no plug in wiring harnesses for flat towing your 2024 Ford Bronco Outer Banks. You'll need the Roadmaster Smart Diode 7-Wire to 6-Wire Wiring Kit for Variable Voltage LED Tail Lights item #RM38FR. This wiring kit…

view full answer...

Answer 7

Yes, as long as you have access to basic tools and have decent mechanical skills install of the Brakemaster kit part #RM-98200 would be very possible at home. There are no specialized tools or skills needed for the install. I attached a link to the…

view full answer...

Answer 8

There is not a fuse bypass for the 2016 Lincoln MKX because no fuses have to be pulled to flat tow it. I confirmed this by checking the recreational towing section in the owner's manual (pages 267 to 268). The procedure outlined in the manual is…

view full answer...

Answer 9

Marc, we don't have any pictures yet of the Replacement Roadmaster Breakaway Kit for BrakeMaster Flat Tow Brake Systems #RM-8600 installed in a 2021 Jeep Wrangler Unlimited Sahara 4xe but according to Roadmaster the air reservoir can be mounted…

view full answer...

Availability of a Replacement Pull Pin for Roadmaster BreakAway Systems

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching