Result: invisibrake parts

For just the cable you need the Replacement Cable for Roadmaster Invisibrake Braking System #RM-452109. While it looks like there may be a cylinder at the end of this cable that's not the cylinder you see like the part #RM-452109-10, for…

There are a few differences between the Demco Demco Stay-IN-Play DUO Supplemental Braking System w/ Wireless Coachlink Monitor #DM86VR and the Roadmaster InvisiBrake Supplemental Braking System #RM-8700. The biggest difference between the two is…

I recommend using a direct receiver type of tow bar over a ball mount tow bar when flat towing. You can experiene a lot of rattling with a ball mount style tow bar #RM-501 and would have to have the ball mount tow bar exactly level. With a receiver…

Hey Steven, so we have the Dometic Penguin Ii High Capacity 15k btu RV AC unit part #DMC33ZR which has a heat pump built into it like you are wanting. You will also need the air box part #DMC43ZR. If you were looking for something a little easier on…

Hello Sam. It sounds like you are on the right track here, because the Roadmaster Universal Braking Monitor for Flat Tow Brake Systems #RM-9530 is exactly what you will need. This will allow you to monitor your Invisibrake system. You will have to…

Roadmaster states that the install of their Inivisbrke part #RM-8700 normally takes around 3-5 hours which does sound right based on our experiences with it. I don't see why the removal of just the vehicle portion would take that long though so…

It sounds like you are looking for a base plate kit that is a fit for a 2018 Jeep Cherokee Trailhawk and if that is the case we have plenty of options. I however recommend using the etrailer Invisible Base Plate Kit part #e98952 which features a nice…

We can get your 2015 Jeep Cherokee Trailhawk set up to be flat towed, and we'll get you the best value. As far as the Mopar flat tow wiring harness, that is needed for a '15 Cherokee Trailhawk with the electronic power steering, yes. It is…

The replacement cable for a Roadmaster Invisi Brake system is the part #RM-452109. If you can confirm that you need a new cable this would be the part number you'd need.

Thanks for the pictures! I sent those over to my contact at Voyager and while I have a replacement camera and cover option, the camera you have has been discontinued and there is not a replacement cover made any longer. The best option is going to be…

Thanks for the purchase and the installation instructions will come with the Roadmaster InvisiBrake Supplemental Braking System #RM-8700 but I have also added a link to them for you here. I have also added a link to a video install we did of this…

The reason for this comes down to safety and the additional pressures that would be exerted on the components when your Blue Ox Ascent #BX4370 tow bar is not level. The additional force that is put on these components ultimately makes it more likely…