Custom Towing Mirrors to Fit 2017 GMC Yukon XL Denali

Question

Question:

Youre an expert Jeffrey posted a reply to the question of custom mirrors for 2017 Yukon XL Denali. Saying there were no custom towing mirrors available. I see now that you do have custom clip on mirrors. Was his reply just the fact that it was from several months ago. He recommended some clip on models 3891. Is the 3891 still the best?your literature on the 3891 says it will not work on the Yukon 2017?

asked by: Billy

0

Expert Reply:

The K-Source Towing Mirrors # KS3891 are universal mirrors so they won't show up in our fit guide for your 2017 GMC Yukon XL even if they will fit unless we've specifically tested it on the vehicle. We have fit them on a 2016 Yukon and I've attached the video for you.

The Snap & Zap # KS80920 is a set of towing mirrors designed for your Yukon. They are confirmed to fit the Denali specifically unless your mirrors have lighting that is not flush with the mirror.

expert reply by: Charles S

0

Donita

6/7/2020

I’m looking for full size towing mirrors for my 2017 Yukon, why are these so hard to find?

Chris R.

6/10/2020

There aren't any full-size towing mirror replacements available for your GMC Yukon. The best option we have available are the larger K-Source # KS3990 that will clip over your existing factory mirrors.

Answer 1

As long as your 2018 GMC Yukon XL doesn't have the telescoping mirrors I recommend the K-Source Snap & Zap, part #KS80920, because they're ridiculously easy to put on. They fit right onto your factory mirrors and keep the puddle lamps and…

view full answer...

Answer 2

The only custom towing mirror option available for your 2017 Chevy Suburban is the K-Source Snap & Zap #KS80920. The CIPA Towing Mirrors #CM10950 that you referenced are only designed to fit certain model years of the Chevy Silverado so they will…

view full answer...

Answer 3

Hey Steven, the Furrion Vision S system like the part #FOS43TASF would work great for this. You could mount the camera in the horse trailer and use the running light circuit to power it so that any time you wanted to see what the horse is doing you…

view full answer...

Answer 4

With you trying to run off of just 12v power you're going to limited to just roof vents with a 12v fan to cooler your horse trailer. There isn't a similar option to the #KH43100 without the heater that would be anything other than a simple…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 11

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 12

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Custom Towing Mirrors to Fit 2017 GMC Yukon XL Denali

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching