Is Additional Parts Needed to Install SuperSprings Custom Suspension Stabilizer # SSA34 on RV

Question

Question:

Are there additional parts needed for this installation. Why are there different specs on this same part number on different web sites?

asked by: Stuart W

0

Expert Reply:

There would not be any additional parts you'd need to buy to install the SuperSprings Custom Suspension Stabilizer # SSA34 on your Class C E-350 motorhome.

We can't account for other websites info, but we get all of our fit and capacity info straight from the Super Springs.

expert reply by: Jameson C

0

Answer 1

Hey William, the closest option we have is a little smaller but is also a High Pointe and its part number #HP56ZR. This has overall dimensions of 20-1/2" wide x 12-7/8" tall x 20" deep. Would a smaller microwave with air fryer work?

view full answer...

Answer 2

The SuperSprings Custom Suspension Stabilizer and Sway Control Kit #SSA22 are a great starting point for your 2012 Ford F-250 4X4. These will help to reduce sag and provide additional sway stabilization. The multiple mounting points on the shackles…

view full answer...

Answer 3

It looks like the 2012 Coachman Freelander RV was built on an E350 chassis, so you'll want to use the Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2" #65053, which is designed to fit on the front of the E-350 RV chassis. This…

view full answer...

Answer 4

Hi Michael; the distance between all of the SmartPlug RV Power Inlet #SM67FR mounting holes is 2.44" on center. I went ahead and attached the mounting hole template below for your reference.

view full answer...

Answer 5

According to SuperSprings, their #SSA34 should take about 1-1/2 to 2 hours to install. I've linked to a product video as well as to .pdf copy of the installation instructions that you can look over, that will give you a good idea of what the…

view full answer...

Answer 6

I do have an option for you but they don't offer the Stability Plus Stabilizer Helper Springs for a 2012 Ford E-350. Instead, I recommend using the SuperSprings Custom Suspension Stabilizer and Sway Control Kit part #SSA34 which is very similar.…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 9

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

The #AL88242 is designed to fit the E-450 and has a slightly different mounting process with different brackets. Since your 2015 Thor Vegas 24.1 is on the E-350 chassis you want to use the #AL88138. Since we do not have a specific fit for the Thor…

view full answer...

Is Additional Parts Needed to Install SuperSprings Custom Suspension Stabilizer # SSA34 on RV

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching