Distance Between Mounting Holes on SmartPlug RV Power Inlet

Question

Question:

I want to replace my Furion 30 amp 125 volt inlet with the SmartPlug RV Power Inlet - 30 Amp - Black. My question is what are the distances between the screw holes, L-R and U-D. I want to be sure they match the holes in the van wall so thats its an easy remove and replace task.

asked by: Michael T

0

Expert Reply:

Hi Michael; the distance between all of the SmartPlug RV Power Inlet # SM67FR mounting holes is 2.44" on center. I went ahead and attached the mounting hole template below for your reference.

expert reply by: Robin H

0

SmartPlug Mounting Template
(click to enlarge)

Robin H.

11/17/2025

Hey Michael, did the SmartPlug RV Power Inlet line up with the existing holes on your van wall? Knowing how the fit turned out could help others planning the same swap.

Michael E.

11/17/2025

@RobinH No it did not. It was however an easy fix to simply expand the existing opening to accommodate the new inlet plug. A Dremel tool, or something similar, works well. The inlet screw holes did match up nicely, it was just the opening on the van wall.

Answer 1

Hey William, the closest option we have is a little smaller but is also a High Pointe and its part number #HP56ZR. This has overall dimensions of 20-1/2" wide x 12-7/8" tall x 20" deep. Would a smaller microwave with air fryer work?

view full answer...

Answer 2

The mounting flange of the SmartPlug RV Power Inlet #SM97FR is flat which means it was designed to mount to a flat surface. To accommodate the roundness of where you plan to mount this you could use washers to take up the extra space.

view full answer...

Answer 3

I spoke with the manufacturer of the SmartPlug RV and Marine Power Inlet and Connector #SM67FR and for your application they actually recommend using 6 AWG wire to properly supply your RV with power from the shore power pedestal.

view full answer...

Answer 4

There would not be any additional parts you'd need to buy to install the SuperSprings Custom Suspension Stabilizer #SSA34 on your Class C E-350 motorhome. We can't account for other websites info, but we get all of our fit and capacity info…

view full answer...

Answer 5

For your 1994 Born Free 24RB that is built on a Ford E-350 chassis the rear sway bar you'd need is the part #RM-1139-117. We have the SuperSprings part #SSA34 that will work great as a rear leaf spring stabilizer that is a confirmed fit too. But…

view full answer...

Answer 6

Actually the best suspension enhancement we can offer for your 2016 Ford E-350 for curbing sway would be the SuperSprings part #SSA34. Of all the suspension enhancement kits we offer this is the style that fights sway the best. A coworker of mine…

view full answer...

Answer 7

Hey Gary, welcome back! It looks like your 2025 Forest River Flagstaff E-Pro 20FBS has the Lippert Quick Drop stabilizer jacks. You'll need the SnapPad SnapJack QD RV Stabilizer Jack Pads item #SN44VR. Your jack feet are going to be removed and…

view full answer...

Answer 8

Hey Jamie, the Roadactive suspension kit part #RAS3611-HD would be your best option. Of all of the suspension enhancement kits this is my favorite. It gives you adjustable suspension support that's maintenance-free, is easy to install, and unlike…

view full answer...

Answer 9

Hey Duane, The Hellwig kit you referenced was designed for trucks and would not work for your trailer but we can still help. What you'd want instead is the SumoSprings kit part #TSS-106-40 which is for lighter duty trailers with underslung…

view full answer...

Answer 10

Hi Mike; the SmartPlug RV and Marine Power Inlet and Connector #SM67FR uses a 316 cast stainless steel housing, which offers maximum corrosion resistance. That’s the main reason it’s listed as a marine product. It can be used on an RV as well, but…

view full answer...

Answer 11

Thread damage to the screw/nut inside of a jack is usually a result of over extending the trailer jack. I'm not saying that is what happened to you but that is the cause of the majority of these situations. Is your jack still covered under…

view full answer...

Answer 12

Hey Gary, congrats on the new trailer. For a 2" ball mount, I recommend the etrailer Adjustable 2-Ball Mount item #e66PR. This ball mount comes with both a 2" and 2-5/16" hitch ball with 7,500 lbs and 10,000 lbs capacity. It has an…

view full answer...