Troubleshooting Trailer Lights that Blink with Ignition Off and Not Work with Ignition On
Updated 07/12/2017 | Published 07/11/2017
Question:
2013 dodge caravan: lites on trailer blink when ignition is off, also left rear trailer lite on! when ignition on, nothing lites up! Any suggestions
asked by: Mike
Expert Reply:
It sounds like there could be a ground issue and also a short somewhere along the trailer that is causing the lights to turn on when the ignition is off.
A bad or weak ground can lead to a variety of strange issues. I first recommend checking that both the vehicle side and trailer side connectors are free of dirt and corrosion. Any debris inside the connectors might be preventing a solid connection with the trailer. Simply clean out as needed.
Next make sure that the main connector grounds are attached to clean and corrosion free bare metal surfaces. The light grounds also need to be attached to clean bare metal surfaces. Anything that is between a light ground and the metal trailer frame can interrupt the ground.
Lastly, I recommend checking the wiring on the trailer and inspect for any broken or pinched wires that might be causing a short.
I have included a troubleshooting article that you might also find helpful. If you are unable to resolve the issue, please let me know and I will be happy to look into this further.
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Vehicle End Connector
- Powered Converter
- No Tow Package
- 4 Flat
- Plug and Lead
- Plug-In
- Hidden
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: 2015 Chrysler Town and Country Curt Echo Wireless Brake Controller: Complete Installation
- Shop: Brake Controller
- Search Results: 18136
- Shop: Trailer Wiring
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: Driver's Side Taillights Don't Work Once Curt C56331 Trailer Wiring Harness Is Installed
- Q&A: Right Turn Signal on Vehicle Activates Left Turn Signal on Trailer
- Q&A: Troubleshooting No Trailer Brake Lights with Wiring Kit Installed on 2013 Dodge Grand Caravan
- Q&A: Trailer Lights Don't Work When Headlights are On
- Q&A: Turn Signals on Trailer Not Working When Running Lights are On
- Q&A: Troubleshooting Running Light Circuit of Trailer Wiring Not Working Afater Install
- Q&A: Troubleshooting Trailer 4-Way Harness that Converter Shows Constant Voltage on Left Turn/Stop
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Curt MV Weight Distribution System - Round Bar - 6,000 lbs GTW, 600 lbs TW
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Search Results: trailer hitch
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Video: How to Choose a Trailer Brake Controller
- Video: What to Know About the Curt TriFlex NEXT Trailer Brake Controller
- Search Results: trailer wiring
- Video: Feature Breakdown: Universal Installation Kit for Trailer Brake Controller
- Shop: Suspension Enhancement
- Shop: Redarc Tow-Pro Liberty Brake Controller w/ Universal Wiring Harness - Dash Knob - Proportional
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Search Results: trailer tires and wheels
- Video: Redarc Tow-Pro Liberty Brake Controller Review RED24FR
on Custom Fit Vehicle Wiring
