Replacement Oil Seals For A 2007 EZ Loader Single 3,700 Lb. Axle Trailer

Updated 07/10/2017 | Published 07/06/2017

Products Featured in This Question

Kodiak XL ProLube Kit for 3500-lb Axles

(79)

$96.32

Replacement Race for L44643 and L44649 Bearings

(1287)

$4.82

Replacement Trailer Hub Bearing - L44649

(2147)

$22.82

Replacement Race for L68149 Bearing

(1287)

$7.58

Replacement Trailer Hub Bearing - L68149

(2147)

$18.41

Question:

Hello, I need the bearing and seal numbers for a 2007 EZ Loader single axle trailer. VIN number is 1ZEADALDX6A010581. I believe my seal has gone bad as every time I put it in the water the oil turns milky. Thank you

asked by: Jason S

Expert Reply:

Thank you for the VIN. You are correct in that a failing oil seal will cause oil to escape from the bearings therefore, you will need to replace your seals. I called EZ Loader and they informed me that you have a 3,700 lb. axle. In order to replace the oil bath seals, I recommend using Kodiak XL ProLube Kit part # XLPROLUBE1980KIT.

Depending on the amount of water that leaked through the seals, you may also want to replace the bearings and races depending on the amount of rust present on the bearings. If you need to replace these items, I recommend using the Replacement Trailer Hub Bearing part # L44649 and part # L68149 in addition to the Replacement Races part # L44610 and part # L68111.

I have attached a review video of the oil bath kit in addition to a help article that will guide you through the process of changing the bearings for you.