Recommended Tires, Brake Assemblies, And Hubs For 2004 Venture Boat Trailer
Updated 07/06/2017 | Published 07/05/2017 >
Products Featured in This Question
Question:
I have a 2004 venture trailer giver 3300lbs I need a hub 6 lugs left side same as drivers 4 sets of bearing kit with bearing number 25580 and15123 I need brake assembly its a 12inch drum no electric just hydraulic also I have a 5 inch roller missing it has an inner piece outer diameter is1.455 and inner is .90 this goes into roller and I missing the clips that hold them can you help me on this thank you also tire and rim 6 lug st225/75d15lr
asked by: Mike O
Expert Reply:
For your 2004 Venture Trailer, I recommend the Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 12" Diameter - 6 on 5-1/2 # AKHD-655-6-K. This comes with the bearings and seal you need. For your hydraulic brake assemblies, I recommend the Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 12" - Left/Right Hand - 5.2K to 7K # AKFBBRK-7-D.
For your tires and wheels, I recommend the Provider ST225/75R15 Radial Trailer Tire w/ 15" White Mod Wheel - 6 on 5-1/2 - LR D # TA24VR. This tire is rated for up to 81 mph and 2,540 lbs at 65 psi.
If you want a bias tire versus a radial, I recommend the Taskmaster ST225/75D15 Bias Tire w/ 15" Black Steel Mod Wheel - 6 on 5-1/2 - LR D - Black Powder Coat Finish # TA72FR. This is also rated for 81 mph max and 2,540 lbs at 65 psi.
For your roller, I don't understand exactly what you are looking for but I think it may be the CE Smith Wobble Roller Retainer Ring - Zinc-Plated Steel - Qty 1 # CE10981.
If you are looking for a keel roller, I recommend the CE Smith Deep V Keel Roller Assembly for Boat Trailers - Galvanized Steel/Black Rubber - 5" # CE10401G or the spool roller # CE32150G. If you want the parts separate, I recommend the roller # YR5213-5 and the Roller Shaft with Pal Nuts for Boat Trailer Rollers - Zinc-Plated Steel - 6-1/4" x 5/8" # CE10722A.
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- Pre-Greased
- Standard
- 25580 / 15123
- Standard Grade
- For 5200 lbs Axles
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media






Continue Researching
- Shop: Brake Controller
- Q&A: Parts Needed To Install a Redarc Tow Pro Elite Brake Controller On a 2023 Subaru Ascent
- Shop: Redarc Tow-Pro Elite Brake Controller w/ Custom Harness - Dash Knob - Off-Road Mode - Up to 3 Axles
- Shop: Redarc Tow-Pro Elite Brake Controller for Tekonsha Harness - Off-Road Mode - Proportional
- Shop: Redarc Tow-Pro Liberty Brake Controller w/ Universal Wiring Harness - Dash Knob - Proportional
- Shop: Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob
- Shop: Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob
- Shop: Universal Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob
- Q&A: Replacement Brake Assemblies for 4.4k Axle with Assemblies Marked 5.2k
- Q&A: Replacement Electric Trailer Brake Assembly for Axletek Hub BD-655
- Article: Most Popular Wheel Bearings
- Q&A: Trailer Hub Replacement for Axletek BD-65535
- Q&A: Replacement Bearings for Dexter 5,200 lb Axles
- Q&A: Looking For Replacement For Hub Seal Victor 47445
- Q&A: Replacement Hubs and Brakes for Axle Tecknology BD2-655 Drums
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Wiring Diagrams
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Parts Required to Add Electric Over Hydraulic Drum Brakes to a Trailer
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide

